Manual Thermocet Apertura line (page 10 of 22) (English)

695094

Zoom out

Zoom in

1/22

Page.10

· Create an opening of 155 mm. in diameter in the outer wall (in a flammable external wall, provide for 50

mm. extra space all round the outer pipe) and mount the horizontal terminal with the wall plate on the in-

side of the wall. On the outside, the wall plate of the horizontal terminal must be sealed sufficiently to the

wall to prevent the possibility of damp and/or flue gases entering the living space.

· If necessary, the duct can be enclosed in a pipe. Adequate fire resistant measures must also be taken if the

duct is to be mounted against flammable materials.

· Determine the position of the fire and the outlet and start construction of the duct with the connection to

the fire. Note the direction of mounting (black sealing rings facing upward), and connect the elements to-

gether by means of the locking bands.

· Fit a 90° bend directly to the horizontal terminal and make the connection with the elements on the appli-

ance. Ensure that all connections are fully gastight.

· A fitted sleeve can be used between bends or for the connection to the fire. Use wall brackets to support

the duct, if necessary.

Installation of the vertical terminal

· The outlet can be placed at any arbitrary position on the roof surface (inlet and outlet in identical pressure

areas) but must comply with the current regulations.

· Use a flat roof panel for flat roofs, or a lead roof panel for sloping tiled roofs to ensure a watertight feed-

through. This can be sloped with the aid of various bends, if necessary.

The opening in the roof decking must be 5 cm. larger all round to ensure sufficient fire resistance. Adjust-

able roof plates can also be used against the roof decking.

· The regulations in the Buildings Decree state that NEN 6068 (determination of the resistance to fire pene-

tration between rooms) must be taken into account. An enclosing pipe of fireproof material (e.g. 12 mm.

Promatect fire resistant sheet) must be used as from a distance of 25 mm. from the outer duct.

· Determine the position of the fire and the outlet and start the construction of the duct with the connection

to the fire (always 1 metre vertical first). Note the direction of mounting (black sealing rings facing up-

ward), and connect the elements together by means of the locking bands. Ensure that all connections are

completely gastight.

· A fitted sleeve can be used between bends or for the connection to the fire. Use 2 wall brackets on each

storey to support the duct.

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Apertura line in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermocet Apertura line Manual

Product: