Manual Thermocet Apertura line (page 6 of 22) (English)

695094

Zoom out

Zoom in

1/22

Page.6

Igniting the pilot light

The gas cock and air-inlet grids should be open in order to light the gas fire.

· First ignite the pilot light by turning knob (A1) to the stop in the direction of position . Now push the

knob in and wait several seconds (gas will flow out of the pilot light burner for the ignition of the pilot

light).

· Keeping the knob pushed in, turn the knob further to the left until you hear a click (spark visible at pilot

light burner).

· When the pilot light is burning, hold the knob pushed in for a further 20 seconds.

· Release knob (A1) and check whether the pilot light continues to burn. If this is not the case, repeat the

ignition operation.

· After the ignition of the pilot light turn knob A1 round to position

Igniting the main burner

Button (B6) on the remote control (B) is used to ignite the main burner.

· The flame height has an infinitely variable adjustment, which is operated by continuing to push button

(B6).

· The flame height can be infinitely adjusted downward by pushing button (B7) until the burner is com-

pletely extinguished.

Extinguishing

Turn the main fire off completely by holding button (B7) pushed in, before extinguishing the appliance

completely.

· Now turn knob A1 to the right as far as it will go, to position push the knob in and then turn it to

position

Warning

After extinguishing the pilot light, wait at least 5 minutes before turning the appliance on again. Do not

burn any wood or other fuel. Do not place any highly flammable articles nearby. Only install the appliance

in a well-ventilated room. The air supply to the appliance must be guaranteed at all times.

Maintenance

· The fire can be cleaned with a soft damp cloth. The appliance should be switched off immediately if any-

thing is spilled on it. Never use an abrasive !!!

· It is recommended to have the fire inspected and cleaned by an installer before

every heating season. If the

special glass is broken or cracked, have it replaced at once before you turn the fire on again.

Warning: Gas fires become hot when they are in use. Care must be exercised therefore and children and in-

valids, for example, should be kept away from burning fires. Fires must also never be placed on or against

flammable materials (curtains etc.).

3. Preparations for installing the Apertura

Remove the accessories inside the supports. Carefully take the supports out of the box, so that the appliance

comes clear. Always check all components for damage or breakage. The appliance is now ready to be in-

stalled.

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Apertura line in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermocet Apertura line Manual

Product: