Manual Thermex IF30 smart (page 6 of 104) (English, German, Dutch, French)

782568

Zoom out

Zoom in

1/104

When drilling (making) holes in the wall consider cables, ducts and pipes in the

wall. When choosing the place of installation total weight of EWH filled with water shall

be taken into account. Walls and floor with low carrying capacity should be strengthened

accordingly.

EWH is suspended by brackets on hook anchors fixed in the wall. Hooks mounting

on the wall shall exclude spontaneous movement of EWH brackets along them.

For EWH maintenance the distance from the protective cover to the nearest sur-

face in the direction of the removable flange axis shall be at least 30 cm for all models.

In order to avoid damage of the user’s and/or third parties’ property in the

event of a faulty hot water system, it is required to install EWH in spaces

with waterproofing and drainage to the sewers, and in no case to place

under items exposed to the water under EWH. When placed in unpro-

tected areas a protective plate (not supplied) with drainage into sewers

shall be installed under the EWH.

In case of placing EWH in hard-to-reach places EVN in order to perform mainte-

nance and warranty service (mezzanine floors, niches, ceiling voids, etc.), installation

and dismantling of EWH is carried out by the user on his own or for his own account.

Note: safety tray is not included into the scope of EWH supply.

CONNECTION TO WATER MAINS

Install pressure relief valve (fig. 1, p.5) at the cold water inlet (fig. 1, p. 3) tube with

the blue ring, by 3.5-4 turnings, ensuring junction tightness with any sealing material

(flax, FUM tape, etc.).

Do not operate the EWH without safety valve or with valve made by other

manufacturers.

During EWH operation you can observe water leak out of the outlet pipe of the

safety valve for excessive pressure release to ensure safety of the water heater. It is

recommended to connect to a drainage hole a rubber or silicone pipe of the relevant

diameter for moisture removal.

Connection to the water supply line shall be carried out in accordance with Fig. 1

using copper, plastic pipes or special flexible sanitary wiring. Do not use any used flexible

wiring. It is recommended to supply water to EWH through filter installed on the cold

water main (not included in the scope of supply).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermex IF30 smart in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermex IF30 smart Manual

Product: