Manual Thermex ID - shadow (page 10 of 128) (English, German, Dutch, French, Italian, Spanish)

782615

Zoom out

Zoom in

1/128

11. TECHNICAL MAINTENANCE

When performing maintenance scale on THE is checked. At the same time residue

that may accumulate in the bottom of the EWH is removed. If there is scale on THE, it

can be removed by using scale removing means or mechanically. It is recommended to

hold the first technical maintenance after a year from the time of connection by experts

of a specialized organization and depending on intensity of scale and residue to deter-

mine intervals of follow-up maintenance. This action will extend the maximum EWH

service life.

The first replacement of the magnesium anode shall be made no later than 12

months from the date of EWH installation. In case of no mark of installation in warranty

certificate with the seal of installation company, the period is calculated from the date

of purchase. Regular periodic maintenance and annual replacement of the magnesium

anode in time is imperative to maintain the manufacturer's warranty. Replacement of

the anode must be accompanied by a mark in the warranty card in case of replacement

by a service organization, or an attached sales receipt for its purchase in case of replace-

ment by the owner.

ATTENTION: accumulation of scale on TEH may cause its damage .

Note: Damages to THE due to scale formation are not subject to warranty. Regular

maintenance is not included in the warranty of the manufacturer and the seller.

The following shall be carried out for maintenance:

• Turn off EWH power;

• Cool hot water or discharge it through the mixer;

• Cut off supply of cold water into EWH;

• Unscrew the relief valve or open drain valve;

• To put on the cold water supply inlet or discharge valve a rubber hose,

sending the other end down the drain;

• Open hot water tap on mixer and drain water from the EWH through

the hose;

• Remove the protective cover, disconnect wires, unscrew and remove

from the casing the removable flange;

• Clean if necessary THEs from scale and remove residue from the tank;

• Assemble, fill the EWH with water and power on.

In models with drain pipe, it is enough to cut off the flow of cold water into the

EWH, unscrew the drain stub on drain pipe and open hot water tap. Once the water is

discharged, you can open for a while cold water supply in EWH for additional tank

washing.

When conducting EWH maintenance by forces of specialized organization mark

with the seal of organization performing maintenance shall be made in service coupon.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermex ID - shadow in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermex ID - shadow Manual

Product: