784586
6
Zoom out
Zoom in
Previous page
1/14
Next page
6
SITE REQUIREMENTS:
The oor must be capable of supporting the total expected load (lled spa plus bathers).
Total lled weight of spa is approximately 1800 lbs.
An adequate drainage system must be provided to deal with overow water.
• Because of the combined weight of the spa, water, and users, it is extremely important that the base where the spa is installed is
smooth, at, level and capable of uniformly supporting this weight for the entire time the spa is installed. If the spa is placed on a surface
which does not meet these requirements, any damage caused by improper support will void the warranty. It is the responsibility of
the spa owner to assure the integrity of the site at all times.
NOTE: Do not install the spa on carpet or other material that can be damaged by moisture.
INDOOR INSTALLATION:
1. No matter where you install the spa, it is important you have a solid support foundation. If you are installing the spa outdoors, ensure
there are no sharp objects that could damage it and that the location is level so the spa sits stably and properly.
2. During lling, emptying or when in use, water may spill out of the spa. The spa should be installed near a ground drain.
3. Do not leave the spa’s surface exposed to direct sunlight for long periods of time.
A. Unfold the spa from the packaging. Spread the spa and cover. Make sure both are right side up.
GFCI TEST:
Before inserting the plug into a power receptacle, make sure the current rate of the power receptacle and the xed wiring are suitable
for the spa. Contact a qualied electrician if you can not verify.
Insert the GFCI plug into a properly grounded power receptacle only.
1. Plug GFCI into power outlet, the indicator light should turn on.
2. Press TEST button, the indicator light should turn off.
3. Press RESET button again for use.
A.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thera Pure spa EST5880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thera Pure spa EST5880 in the language / languages: English as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info