606776
32
Zoom out
Zoom in
Previous page
1/71
Next page
TR 648 top2 RC / -DCF KNX 8-channel 365 day time switches
Status: March 14 (Subject to change) Page 32 of 71
3.3.2.7 Parameter pages "Threshold channel C9..C12"
The threshold channel block forms a separate unit that is completely independent of the
switching times.
Principle:
A value is received from the bus and compared with the set threshold.
The condition is fulfilled if the value is higher than the set threshold.
In turn, not fulfilled if the value is below it.
The response of the output objects to fulfilling/not fulfilling the condition is set on the Objects
parameter page.
The channel status (condition fulfilled/unfulfilled) for each threshold channel can also be
configured as input value for logic channels (see below, The logic channels).
The switching channels are activated on the General parameter page.
Table 18
Designation
Values
Description
Type of threshold value
object
object type: Per cent (DPT
5.001)
Object type: Counter value
0..255 (DPT 5.010)
Object type: Counter value
0..65535 (DPT 7.001)
Object type: EIS5 e.g. CO2,
brightness, etc. (DPT 9.xxx)
Value type for threshold.
Parameter for Percent threshold object
Threshold value (in %)
1..99
Default = 50
Desired threshold value as percentage.
Hysteresis (as %)
1..99
Default = 5
Prevents frequent switching after small
changes in readings.
The hysteresis is uniformly negative for
all threshold types, e.g. threshold 50,
hysteresis 5 means:
Switch on at > 50 and
switch off at 50 – hysteresis = 45
Parameter for threshold value object Counter value 0..255
Threshold value
1..254
Default = 127
Desired threshold value as 1 byte
number from 1 to 254.
Hysteresis
1..254
Default = 5
The hysteresis prevents frequent
switching after small changes in
readings.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben TR 648 top2 RC KNX - 6489212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben TR 648 top2 RC KNX - 6489212 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben TR 648 top2 RC KNX - 6489212

Theben TR 648 top2 RC KNX - 6489212 User Manual - English - 36 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - German - 36 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - German - 72 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - Dutch - 36 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - Dutch - 64 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - French - 36 pages

Theben TR 648 top2 RC KNX - 6489212 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info