85
14.0 Glossary
What does automatic operation (Auto) mean?
The cursor is below Auto. Current time is displayed.
The switching sequence of the time switch is determined by the stored swit-
ching times. (Note: permanent switchng has priority see Chapters 6.2
and 6.3).
What is automatic return?
When in the interrogation or programming mode, if no button is used for a
long time, the display reverts automatically, after approx. 40 secs. to auto-
matic operation. The product then takes up the switching status specified by
the program.
Program recan?
This results in the time switch checking the stored program and implemen-
ting the correct switching condition.
What does entry correction mean?
In the event of wrong entry during programming, by pressing the CL button,
the entry can be cancelled and immediately corrected.
What does weekday block formation mean?
Simultaneous programming at one switching time e.g. 6
00
ON on several
days of the week e.g. Monday, Tuesday and Friday.
Only one memory lacation is used.
What does Obelisk memory card mean?
Mobile data carrier can be used for:
– security of the programmed time program
– duplication of the programmed time program
– faster programming of additional time switches with the same program
Option only with Obelisk software:
– programming on the PC, store on Obelisk memory card
– read program into time switch(es)
– program print out possible
What does RESET mean?
By pressing the RESET button, a defined new start for the time switch is
effected. The current time and date are cancelled.The stored switching times
are maintained permanently.
What does EEPROM mean?
An EEPROM is an electronic memory, which can store memorised data even
without current (without battery back up) for a period of approx. 40 years.
What is an LCD?
An LCD display is a liquid crystal display, with which current time and stored
data (switching times) can be shown.
