606540
8
Zoom out
Zoom in
Previous page
1/20
Next page
Set TSP parameters
(Transparent Slave Parameters)
The TSP parameters are set in the SETTINGS menu.
Confirm TSP-PARAMETER with OK.
15 parameters can be set (see below).
Parameter 0 includes the 5 systems/applications.
Use + orkeys or rotary control to enter the
value and confirm by pressing OK.
The value is transferred to the OT Box RAMSES top2 OT.
15 parameters are available from 0–14:
0 System selection (1, 2, 3, 4, 5 è default 1)
1 Boiler base temperature (10 ... 50 degrees, default 10 = off)
2 Max. feed temperature main circuit
(30 ... 90 degrees, default 80)
3 Max. feed temperature auxiliary circuit (rear mixer)
(30 ... 90 degrees, default 40)
4 Boiler hysteresis (1 ... 15 K, default 5)
5 Domestic hot water hysteresis (1 ... 10 K, default 5)
6 Domestic hot water priority / parallel operation (default ...)
7 Domestic hot water pump switch-off delay (0 ... 20 mins,
default 10)
8 Domestic hot water for frost protection (default ...)
9 Time for domestic hot water circulation pump:
0: Domestic hot water circulation pump only runs
when temperature-controlled
0–99: Domestic hot water circulation pump via ΔT on,
Value is the maximum runtime in s
10 Pump protection time (0 .. 11 pm, default 12)
11 Pump protection duration in s (0…99, default 15,
0 = no pump protection)
12
ΔT for sequence control (5 ... 25, default 15) resolution 0.1 K
13 ΔT1 for pump switch heater 1 (5 .. 15 K, default 5 K)
14 ΔT1 for pump switch heater 2 (5 .. 15 K, default 5 K)
Further information available in product
manual for OT box RAMSES top2 OT at
www.theben.de.
Set heating curve of second heating circuit on controller
The heating circuit is adjusted in the SETTINGS menu.
On the room thermostat RAMSES 850 top2 OT the heating curve for
2 heating circuits can be adjusted (see RAMSES 850 top2 OT oper-
ating guide, page 31). Base point2 and end point2, etc. must be set
on the room thermostat.
Setting range: Base point 10–30 °C, default 20 °C
End point 25-60 °C, default 35 °C
TSP
PARAMETERS
TSP1
1
TSP2
10
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 856 top2 OT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 856 top2 OT in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 856 top2 OT

Theben RAMSES 856 top2 OT Usermanual and installation guide - German - 20 pages

Theben RAMSES 856 top2 OT Usermanual and installation guide - Dutch - 20 pages

Theben RAMSES 856 top2 OT Usermanual and installation guide - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info