5.4.3 Selecting the language
Select the language with the buttons or .
Confirm with the OK button. Cancel with ESC.
back to
see 5.4.1
6.5.5. Selecting the Language
6.5.6. Enable Household Water by Selecting “hot water
immediately”
With this function, household water can be heated and enabled
once, regardless of the times set in the program.
Select the language with the buttons ▲ or ▼. Confirm with the
OK button. Cancel with ESC.
6.5.4. Setting the Wall Compensation
If an unsuitable wall has to be used to mount the thermostat (installa-
tion at the exterior wall, chimney, etc.), there may be deviations in
temperature between the temperature measured by the thermostat
and the actual room temperature. This difference in temperature can
be compensated with the wall compensation by setting an offset value
(the wall compensation can be set within a range of +/–6 °C).
Example: The difference between the measured and the controlled
temperature is 2 °C, i.e. the room temperature is regulated 2 °C too
high: Offset value –2 °C.
back to
Setting with the buttons ▲ or ▼. Confirm the value with OK
(cancel with ESC).
see
chap. 6.5
hw immediate
settings
off
on
6.5.3. Selecting Hot Water
With the setting HW TIME ONLY, you can only have hot water.
With TEMP, the setting of the boiler is taken over. With the setting
HW TIME/TEMP, you can additionally define the HW target tempe-
rature.
hot
water
hw time only
hw time/temp
OK
deutsch
nederlands
english
francais
italiano
dansk
espanol
6.5.7. Heating Switch Off Depending on Outdoor Temperature
(only Weather-Compensated Control)
In the menu
settings the display shows the text heating off at.
Now, you can enter the temperature for the heating switch off
depending on outdoor temperature.
