5.4.3 Selecting the language
5.4.4 Setting the wall compensation
Incaseofunfavourableconditionsattheinstallationsite(installation
attheexteriorwall,chimney,etc.),theremaybedeviationsintemper-
aturebetweenthetemperaturemeasuredbythethermostat andthe
actualroomtemperature.Thisdifferenceintemperaturecanbecom-
pensatedwiththewallcompensationbysettingan offset value.
Example: Thedifferencebetweenthemeasuredandthecontrolled
temperatureis2°C,i.e.theroomtemperatureis regulated2°Ctoo
high:Offsetvalue-2°C.
5
Language
Francais
English
Deutsch
NL
Espanol
Italiano
Selectthelanguagewiththebuttons or .
Confirmwith theOK button.CancelwithESC.
OK
backto
Service
see5.4.1
OK
Wall comp Wall c omp
0.0
o
C
Offsetvalueadjustablefrom-3°C ... +3°C.
Settingwith or .ConfirmthevaluewithOK.
CancelwithESC.
OK OK
back to
see 5.4.1
5 … 30
0.1°C ...5.0°C
Set with buttons
▲or ▼:
0.2°C ...5.0°C
back to
or autom.
after 6 sec.
see 5.4.1
5.4.3 Selecting the language
Select the language with the buttons ▲or ▼. Confirm with the OK button.
Cancel with ESC.
5.4.4 Setting the wall compensation
In case of unfavourable conditions at the installation site (installation at the
exterior wall, chimney, etc.), there may be deviations in temperature between
the temperature measured by the thermostat and the actual room temperature.
This difference in temperature can be compensated with the wall compensation by
setting an offset value.
Example: The difference between the measured and the controlled temperature
is 2 °C, i.e. the room temperature is regulated 2 °C too
high: Offset value –2 °C.
Offset value adjustable from –3 °C ... +3 °C. Setting with ▲or ▼. Confirm the
value with OK. Cancel with ESC.
5.4.5 Adjusting the controller behaviour
With suitable heating systems the PD controller is characterized by a short set-
ting time, scarce maximum overshooting and therefore a high control accuracy.
With over or under engineered heating systems a hysteresis controller is cha-
racterized by scarce shift frequency and small temperature deviations.
Characteristics of the PD controller
Characteristics of a hysteresis controller
Set with buttons
▲or ▼:
0.2°C ...1.0°C
deutsch
english
francais
italiano
espanol
nederlands
portugues
0,1 °C ... 5,0 °C
27 ENGLISH