5. The holiday program is now programmed and is activated at the
set start time.
6. Reset the switch for program selection.
7. While the holiday program is active, the display shows the target
temperature and the text line
HOLIDAY.
Note: Checking, clearing or cancelling a holiday program is
described in section 4.8 on page 20.
5.2 Changing the Settings for Target
Temperatures
For the temperature profiles of the individual programs, you can
choose between three temperature values: Comfort, lower and
antifreeze temperature.
These temperature values are programmed ex works. You can change
these according to your wishes.
1. Push the slideswitch switch to the MENU setting.
2. With the buttons ▲ or ▼, select the entry
TARGET TEMP.
Confirm with the OK button.
3. The display first shows the comfort temperature.
With the buttons ▲ or ▼, change the comfort, lower and anti-
freeze temperature one after the other. Confirm each setting with
the OK button. The display changes automatically.
4. After having set the antifreeze temperature, the setting of the tar-
get temperatures is completed. The display shows
END and auto-
matically changes back after 3 seconds.
5. Select by program switch the desired program.
5.3 Program P3
5.3.1 Overview “Program” menu
4.9 Party / Eco Program
With the “Party / Eco” function, you can cancel the temperature
profile of the set program for the next few hours (up to 23 hours and
50 minutes).
4.9.1 Setting the Party / Eco Program
1. Press both buttons ▲ and ▼ at the same time for approx. 2
seconds.
2. The display changes and shows the text
PERIOD and a flashing
clock. Within 3 seconds, press one of the buttons ▲ or ▼, and
set the desired period in increments of 10 minutes.
3. After 3 seconds, the display changes and shows the text
COMFORT
or LOWER. Within 3 seconds, select the comfort or lower tempera-
ture with the buttons ▲ or ▼.
4. The display changes automatically after 3 seconds. The display
shows the desired target temperature with the addition “PARTY”
(for comfort temperature) or “ECO” (for lower temperature). The
Party or Eco program is active for the set period.
4.9.2 Early Cancellation of the Party / Eco Program
In order to cancel the “Party / Eco” program, press both buttons ▲
and ▼ for approx. 2 seconds, until the display changes. Wait ano-
ther 3 seconds until the display changes back again. The Party / Eco
program is cancelled, and the addition “PARTY” or “ECO” disap-
pears from the display.
5 Programming
Note: The P1 and P2 programs are fixed programs ex works, and
cannot be changed.
5.1 Setting the Holiday Program
By setting a holiday program, the temperature profile of the set auto-
matic program can be cancelled for any period of time.
Note: With the ESC button, you can cancel the programming at
any time.
1. Push the slideswitch switch to the MENU setting.
2. With the buttons ▲ or ▼, select the entry
HOLIDAY.
Confirm with the OK button.
Note: If a holiday program is already saved, you can choose if
you want to check or clear it. In order to save a new holiday pro-
gram, the already saved holiday program must be cleared. See
section 4.8 on page 20.
3. If no holiday program has been saved yet, set the start and end
date now with the buttons ▲ and ▼.
Set the year, month, date and hour one after the other. Confirm
each setting with the OK button.
The display changes automatically.
Note: The end time must not be the same as or earlier than the
start time. Otherwise an error message is displayed:
ERROR. The
holiday program must then be programmed again.
4. Select whether you want the comfort, the lower or the antifreeze
temperature for thd set period. Confirm with the OK button.
