19
ENGLISH
Note: The time and date can also be changed in the "Service" menu
(see page 25). There you can also set the changeover from winter to
summer time.
4.5 Selecting the Temperature Profile
4.5.1 Program P1 (fixed program)
ComforttemperatureMo-Fr from 6 a.m. – 10 p.m. as
well as Sa-Su from 7 a.m. - 11 p.m. In between low-
er temperature.
4.5.2 Program P2 (fixed program)
Comfort temperature Mo-Fr from 6 - 8 a.m. and from 4 to 10 p.m. as
well as Sa-Su from 7 a.m. – 11 p.m. In between lower temperature.
4.5.3 Program P3 (freely programmable)
The program P3 is an individually programmable temperature profile.
Program P3 is not programmed when delivered. For programming
see page 22.
4.5.4 Permanent comfort
The room temperature is permanently regulated to the programmed
comfort temperature. There is no reduction.
4.5.5 Permanent reduction
The room temperature is permanently regulated to the programmed
lower temperature.
4.5.6 Antifreezing
The room thermostat only comes on when the room temperature falls
below the programmed antifreeze temperature.
4.6 Checking Current Room Temperature and
Settings - Info Button
With the Info button you can display the current room temperature as
well as all important settings of the program set at the rotary switch.
3. The display changes automatically to
the date setting.
Set the year, month and date one
after the other. Confirm each setting
with the OK button. The display
changes automatically.
4. The display automatically changes to the set automatic mode,
e.g. display of the target temperature.
P2
P3
P1
MENU
1. Press the Info button. The current room temperature is shown in
the display for approx. 3 seconds. In order to continue with the
check, press the Info button again.
2. This way you can check the following information one after the
other:
- Room temperature
- Currently active target temperature
- Date and time
- Switch times of the set program (only visible with opened
hinged cover). The fixed programmed temperature profiles
and switch times are described in section 4.5.
3. The display changes automatically to
the date setting.
Set the year, month and date one
after the other. Confirm each setting
with the OK button. The display
changes automatically.
4. The display automatically changes to the set automatic mode,
e.g. display of the target temperature.
Note: The time and date can also be changed in the “Service” menu
(see page 25). There you can also set the changeover from winter to
summer time.
4.5 Selecting the Temperature Profile
4.5.1 Program P1 (fixed program)
Comfort temperature Mo-Fr from 6 a.m. - 10 p.m. as
well as Sa-Su from 7 a.m. - 11 p.m. In between
lower temperature.
4.5.2 Program P2 (fixed program)
Comfort temperature Mo-Fr from 6 - 8 a.m. and from 4 to 10 p.m. as
well as Sa-Su from 7 a.m. - 11 p.m. In between lower temperature.
4.5.3 Program P3 (freely programmable)
The program P3 is an individually programmable temperature profile.
Program P3 is not programmed when delivered. For programming
see page 22.
4.5.4 Permanent comfort
The room temperature is permanently regulated to the programmed
comfort temperature. There is no reduction.
4.5.5 Permanent reduction
The room temperature is permanently regulated to the programmed
lower temperature.
4.5.6 Antifreezing
The room thermostat only comes on when the room temperature
falls below the programmed antifreeze temperature.
4.6 Checking Current Room Temperature and
Settings - lnfo Button
With the lnfo button you can display the current room temperature
as well as all important settings of the program set at the rotary
switch.
1. Press the Info button. The current room temperature is shown in
the display for approx. 3 seconds. In order to continue with the
check, press the lnfo button again.
2. This way you can check the following information one after the
other:
- Room temperature
- Currently active target temperature
- Date and time
- Switch times of the set program (only visible with opened
hinged cover). The fixed programmed temperature profiles
and switch times are described in section 4.5.
