606548
36
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 36 von 56
4.3 Typical applications:
4.3.1 Heating, blinds and switching
In addition to its function as a heating controller, RAM 713 S can control blinds and room
lighting and switch on and off via the external interface.
Parameter page: Settings
Keys for controlling the blinds (Up/Down and Step/Stop) are connected to E1 and E2.
Objects 9 and 10 are linked with the corresponding control objects of the blinds actuator.
The switch is connected to the input E3 and the switch object (Object 13) is connected to the
relevant channel of the switch actuator.
Hint: Both functions can be realised with the same actuator if necessary.
RMG 8 as a switching and blinds actuator or JMG 4 (blinds actuator) with a switching
actuator upgrade module RME 8 or RMX 4. (See chapter entitled external interface)
4.3.2 Heating and cooling in the 2 wire system
The following points must be observed for use in a 2 wire heating/cooling system:
In the 2 wire system, heating and cooling mediums (depending on the season) are –
lead through the same lines and controlled via the same valve.
Über einen Parameter können The cooling control variable and the heating control
variable can be sent via a parameter to a single, common object (Object 7) - (see
parameter: Output of cooling control variable, chapter on cooling control)
It is also possible to connect the "heating control variable" and "cooling control
variable" objects to the positioning actuator via the same group address.
The control variables must not be sent cyclically
The switchover between heating and cooling mediums is performed by the system and
must therefore be passed on to the room thermostat.
The parameter "Switching between heating and cooling" (Parameter page "Cooling
control") is set to "via object". The heating/cooling system must send a 0 for heating
mode and a 1 for cooling mode to Object 15 "Switching between heating and cooling"
in the RAM 713.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info