606548
29
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 29 von 56
Continued:
Designation
Values
Meaning
Recirculation of hysteresis
after switching point
None
0.1 K/min
0.2 K/min
0.3 K/min
For switching additional
switching stage. The
recirculation causes a gradual
decrease in the hysteresis over
time, and the control accuracy
is increased.
The hysteresis is equivalent to
the programmed value for
each switch-off and is
gradually reduced by the
recirculation process. The
hysteresis can reduce to 0 K
over prolonged periods of
switch-off.
At the next switch-on, it is
reset to the configured value.
Sends the control variable for
the 2
nd
heating stage
On change by 1%
On change by 2 %
On change by 3 %
On change by 5 %
On change by 7 %
On change by 10 %
On change by 15 %
After how much % change*
in the control variable is the
new value to be sent?
Small values increase control
accuracy but also the bus
load.
Sends Sending the additional
heating
Do not send cyclically
every 2 min.
every 3 min.
every 5 min.
every 10 min.
every 15 min.
every 20 min.
every 30 min.
every 45 min.
every 60 min.
At what intervals should the
switching status of the
additional stage be sent?
*Change since last sending
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info