606548
24
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 24 von 56
3.4.6 Cooling control
Table 15
Designation
Values
Meaning
Type of control
Continuous control
2-point control
Infinite control
(0 .. 100%).
Switching control (On/Off).
See Appendix: Continuous and
switching control
Sets the control parameters
Via system type
User-defined
Standard application
Prof. application: Self-configure
P/PI control
System type
Cooling surface
Fan coil unit
PI control with:
Integrated time = 90 mins
Bandwidth = 2 k
Integrated time = 180 minutes
Bandwidth = 4 k
Sends the cooling control
variable
On change by 1%
On change by 2 %
On change by 3 %
On change by 5 %
On change by 7 %
On change by 10 %
On change by 15 %
After how much % change* in
the control variable is the new
value to be sent.
Small values increase control
accuracy and also the bus load.
Switches between heating and
cooling
automatic
Via object
RAM 713 S automatically
switches to cooling mode when
the actual temperature is above
the setpoint value.
Cooling mode can be activated
only on the bus side via Object
15 (1= cooling).
Cooling mode remains off for as
long as this object is not set (=0).
Output of the cooling control
variable
(Only when switching
between heating and cooling
via object)
For separate object
(object 8)
Together with heating
control variable (object 7)
Cooling control variable is output
via object 8 and heating control
variable via object 7.
Both control variables are sent
via object 7.
For 2 wire systems with a valve
and seasonal change of medium.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info