606548
11
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 11 von 56
3.3.2 Description of the objects
Object 0 “Basic setpoint value” / “Manual setpoint value offset”
This object can assume 2 different functions.
With it, either a new setpoint temperature can be specified or the current setpoint temperature
can be offset by a certain value, depending on the configuration of the rotary control.
Table 4.
Parameters: Function of the rotary
control
Function of the object
Basic setpoint value /
Disabled, but object basic setpoint value
available
Defining the setpoint temperature:
The basic setpoint value is first specified via the
application at start-up and stored in the “Basic
setpoint value” object.
Afterwards it can be specified again at any time
using the object 0 (limited by minimum or
maximum valid setpoint value).
If the bus voltage fails, this object is backed up and
the last value is restored when the bus voltage
returns. The object can be described indefinitely
often.
Manual offset /
Disabled, but object manual offset
available
Offsetting the setpoint temperature
The object receives a temperature differential in EIS
5 format. The desired room temperature (current
setpoint value) can be adjusted from the basic
setpoint value by this differential.
The following applies in comfort mode (heating):
current setpoint value (Obj. 1) = basic setpoint
value (rotary control) + manual setpoint value offset
(Obj. 0)
Values outside of the programmed range (see “Max.
setpoint value offset on the rotary control. ”) are
limited to the highest or the lowest value.
Note:
The offset always refers to the set basic setpoint
value and not to the current setpoint value.
Object 1 “Current setpoint value”
This object sends the current setpoint temperature as a EIS 5 telegram (2 bytes) to the bus.
The sending behaviour can be set on the “setpoint values” parameters page.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info