606547
52
Zoom out
Zoom in
Previous page
1/65
Next page
RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 52 of 65
6.2 Setpoint offset
The current setpoint value can be adjusted in the RAM 712 via object 1 manual setpoint value
offset.
In this case, the setpoint value is changed by sending the desired offset to object 1.
This involves the differential (may be preceded by a minus sign) being sent in EIS5 format
to object 1.
The differential between the setpoint value offset and the base setpoint value is sent by object 10
at each change (e.g. -1.00).
The offset limits are set on the setpoint values parameter page with the maximum valid setpoint
offset parameter.
The offset always relates to the base setpoint value and not to the current setpoint value.
Example Base setpoint value of 21°C:
If a value of 2.00 is sent to object 1, the new setpoint value is calculated as follows:
21 °C + 2.00K = 23.00°C.
To then bring the setpoint value to 22°C, the differential is resent to the programmed base
setpoint value (here 21°C), in this case 1.00K (21°C+1.00K=22°C)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 712 KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 712 KNX in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 712 KNX

Theben RAMSES 712 KNX User Manual - English - 2 pages

Theben RAMSES 712 KNX User Manual - German - 67 pages

Theben RAMSES 712 KNX User Manual - German - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 61 pages

Theben RAMSES 712 KNX User Manual - French - 62 pages

Theben RAMSES 712 KNX User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info