606474

Theben RAM 784 S Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
Einstellung durch den Fachmann/ Only for qualified electrician/ Réglage par le
professionnel uniquement
/ Instelling enkel door één bevoegd vakman/
Indicazioni per l’elettricista
19
8
Punto di lavoro regolabile all’atto dell’installazione
Il cronotermostato è regolato in fabbrica. Durante la fase d’installazione, ad esempio una
parete fredda, potrebbe rivelarsi necessaria una registrazione della temperatura. Potrà
così essere corretto il valore della temperatura rilevata.
Esempio: Regolazione piú alta della temperatura:
Ruotate la manopola 8 nel senso della freccia (vedi figura), eventualmente ripetete.
Come il temperatura di unità abitative e stabilizzato, ripete si nessesario.
Anpassung des Arbeitspunktes
Der Uhrenthermostat ist werksseitig justiert. Sollte durch den Montageort, z. B.
eine kalte Betonwand, eine Nachstellung notwendig sein, so kann am Poti 8 die ge-
messene Temperaturabweichung korrigiert werden.
Bsp.: Geregelte Temperatur zu hoch:
Drehen Sie den Drehknopf 8 in Pfeilrichtung s. Abb.
Nach Stabilisierung der Raumtemperatur ggf. wiederholen.
Adjustment of the operating point
The clock thermostat is adjusted in the factory. If re-setting is necessary due to the
place of installation e.g. a cold cement wall, the measured temperature deviation
can be corrected with the pentiometer 8.
Example: Controlled temperature too high:Turn the potentiometer (rotary switch)
see illustration in anti-clockwise direction.After the roomtemperature is stabilized,
repeat if necessary.
Etalonnage du seuil de commutation
Le thermostat à horloge est étalonné en usine. Si l’endroit de montage, par exemple, un mur
de béton froid, rendait un nouveau réglage nécessaire, l’écart de température constaté peut
être corrigé au bouton de réglage 8.
Ex.: température régulée trop élevée: Tournez le bouton 8 légèrement dans le sens an-
ti-horlogique,
répéter l´opération si besoin est, après stabilisation de la température am-
biante.
Remarque: veillez à ce qu’il n’y ait pas de courant d’air froid au dos de l’appareil.Au besoin,
obturez les canalisations électriques avec du silicone.
Ljking van de schakeldrempel:
De klokthermostaat wordt in de fabriek geijkt. Indien vanwege de montageplaats, bv. één
koude betonnen muur, één bijstelling noodzakelijk zou zijn, kan het vastgestelde tempera-
tuurverschil gecorrigeerd worden met de instelknop 8.
Vb.: geregelde temperatuur te hoog:
verdraai de instelknop 8 één weinig tegen wijzerzin, zo nodig herhalen.
Opmerking: koude luchtstroom aan de rugzijde van het apparaat moet vermeden worden.
Zo nodig, de elektrische leidingen met silicone afdichten.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAM 784 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAM 784 S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info