606787
13
Zoom out
Zoom in
Previous page
1/15
Next page
OSIRIA secondary clocks
Updated: Jan-14 (Subject to change) Page 13 of 15
7 APPENDIX
7.1 Hand reset to zero
When setting the hand to zero, the hour and minute hands are moved to a set position (12:00).
This makes it possible to ensure the exact positioning of the hands during normal operation.
The hand is reset to zero:
After receiving a 1 on the Force synchonisation object.
After first receipt of a time after restoration of bus voltage.
7.2 Synchronisation behaviour of clock
The control unit must have received at least one time telegram to set the clock.
If no date has been received, 1.1.2001 will be used as a start date (Only for models
with date display).
If the clock receives a time for the first time or the new time differs by more than 5
seconds from the internal time then the time will be set after the hands have been reset
to zero again.
If the time only differs by 1 - 5 seconds, then the correction will be made between the
39th and 41st minutes in an hour.
Example: A time telegram with a difference of 4 seconds is received at 9:10.
The difference is corrected between 9:39 and 9:41.
The clock resets itself when receiving the first time telegram after the restoration of
bus voltage. This happens even if the time was not set correctly.
If the hand is reset to zero via the bus (force synchronisation or
new time), then the clock will stop immediately and perform the zero reset.
7.3 Troubleshooting
Remove bus terminal.
Put bus connection terminal back in again.
The clock automatically resets after it has received a carrier signal (as with initial
set-up)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben OSIRIA 232 BQ KNX 5009233 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben OSIRIA 232 BQ KNX 5009233 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben OSIRIA 232 BQ KNX 5009233

Theben OSIRIA 232 BQ KNX 5009233 User Manual - English - 1 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - German - 16 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - German - 1 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - Dutch - 1 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - Dutch - 10 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - French - 10 pages

Theben OSIRIA 232 BQ KNX 5009233 User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info