606551
30
Zoom out
Zoom in
Previous page
1/41
Next page
Continuous drive actuator CHEOPS drive
theben
As of: Jul-11 (Subject to change without notice) Page 30 of 41
5.3 Determine the maximum control variable
5.3.1 Application
If within a system all valve actuators are only slightly open, e.g. one at 5%, one at 12%,
another at 7% etc., the heating boiler can reduce its output because only a small amount of
heating energy is required.
In order to guarantee this, the heating boiler requires the following information:
How high is the actuating value in the room, which currently exhibits the greatest heat
requirement?
With Cheops valve actuators, this task is handled by the "Maximum position" function.
5.3.2 Principle
The actuating values are constantly compared between all participants (Cheops valve
actuators). Those participant with a higher actuating value than the one received may send it,
those with a smaller one may not.
In order to accelerate the process, the greater the difference between its own and the received
actuating value, the greater the speed at which the valve actuator sends.
Thus, the valve actuator with the highest actuating value sends first and beats the remainders.
5.3.3 Practice
The actuating value comparison takes place via Object 3 ("Maximum position") where
for each valve actuator, a common group address for the maximum position is placed on
Object 3.
In order to start the actuating value comparison between the participants, one (and only one)
participant must send a value to this group address cyclically.
This task can be handled by either boiler or valve actuator.
If it is the boiler, it must send the smallest possible value, i.e. 0%.
If it is a Cheops valve actuator, the parameter " Transmission of object
"Max. actuating value"(for boiler control)" on parameter page " Security and forced mode”
must be set to any cycle time.
This valve actuator then regularly sends its own actuating value and the others can respond
accordingly.
Irrespective of which participants act as initiator, the "Transm. of object “max. actuating
value” (for heating system)" must be set to the default value for all other valve actuators, see
Figure:
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben CHEOPS drive KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben CHEOPS drive KNX in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben CHEOPS drive KNX

Theben CHEOPS drive KNX User Manual - English - 1 pages

Theben CHEOPS drive KNX User Manual - German - 42 pages

Theben CHEOPS drive KNX User Manual - German - 1 pages

Theben CHEOPS drive KNX User Manual - Dutch - 43 pages

Theben CHEOPS drive KNX User Manual - French - 43 pages

Theben CHEOPS drive KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info