606550
16
Zoom out
Zoom in
Previous page
1/71
Next page
Continuous valve actuator CHEOPS control
theben
As of: Jul-11 (Subject to change without notice) Page 16 of 71
Note:
In the "Heating control" setting, the object is not available because neither the cooling
function nor the additional step are present.
If you wish to read out Object 8 via the bus, Object 7 must be hidden (see above) and the
"Read" flag must be set.
Object 9 "Current set point value"
This object sends the Current set point temperature as a EIS 5 telegram (2 bytes) on the bus.
The send response can be set on the "Heating control" parameter page.
Object 10 "Current operating mode"
This object sends the current operating mode as a 1 byte value.
The send response can be set on the "Operating mode" parameter page.
The operating modes are coded as follows:
Table 10
Value
Operating mode
1
Comfort
2
Standby
3
Night
4
Frost protection/heat
protection
Object 11 "Switchover"
This object is available if an automatic switching between heating and cooling is not required.
The setting is made on the "Cooling control" parameter page
The cooling operation is forced via a 1 and the heating operation via a 0.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben CHEOPS control KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben CHEOPS control KNX in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben CHEOPS control KNX

Theben CHEOPS control KNX User Manual - English - 1 pages

Theben CHEOPS control KNX User Manual - German - 72 pages

Theben CHEOPS control KNX User Manual - German - 1 pages

Theben CHEOPS control KNX User Manual - Dutch - 76 pages

Theben CHEOPS control KNX User Manual - French - 74 pages

Theben CHEOPS control KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info