Manual The Columbus Kamado (page 18 of 68) (German, Dutch, Spanish)

778159

Zoom out

Zoom in

1/68

Onderstel:

STAP 1 - Bevestig de bovenste (4 en 5) en onderste verbindingsstrips (2 en

3) aan elkaar met de meegeleverde schroeven (A) en moeren (E) zoals in de

bovenstaande aeelding. Draai de schroeven met de hand vast.

STAP 2 - Bevestig de bovenste verbindingsstrips (4 en 5) aan de poten van het

onderstel door poot (1) aan de bovenste verbindingsstrips te verbinden met

bout (C) en moer (J) zoals in de bovenstaande aeelding. Draai de schroeven

met de hand vast.

IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.

Ensure that the lid is closed prior to assembly.

Assemblyinstructions

Partslist

WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or

components of the Kamado Grill.

Prior to assembly, read the instructions carefully. Check all parts against the parts list.

Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.

For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.

7 (2x)

8 (2x)

(1x)

11 (1x)

12 (1x)

14 (1x)

15 (1x)

16 (2x)

(2x)

9 (1x)

(1x)

(2x)

1 (4x)

2 (1x)

3 (1x)

4 (1x)

5 (1x)

6 (4x)

IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.

Ensure that the lid is closed prior to assembly.

STEP 1 -

Position the parts on a flat surface that will not scratch the finish of the nest components, paying close

attention to the joint overlap in illustration the 2pcs Upper cross brace(4&5) and 2pcs Lorer cross brace(2&3).

Using the given hardware and hand tighten the braces with screw A + nut F.

I (2x)

C (4x)

A (4x)

B (4x)

D(2x)

E(4x)

F(4x)

G(4x)

H (4x)

J (4x)

(1x)

Assemblyinstructions

STEP 2 -

STEP 3 -

STEP 4 -

STEP 5 -

STEP 6 -

STEP 7 -

(Joining the two halves assembled in step l) Stand the section 1 upright, and place the upper cross

braces (4&5) close to section 1. Inserting truss head screw C through the hole of section1

and section 4&5 and install K Keps nut and tighten securely.

(Installing the lower cross braces and casters) Place the assembled lower cross braces (2&3) under section 1,

Stand the section 6 upright to make it close to section 1 and secrion 4&5. Inserting screw B through

section 4&5 and section 6, install G Keps nut and tighten securely.Next insert the threaded caster stem

through the hole in the end of the lower cross brace then through the riser and finally the riser brace.

Install (H) flat washer and (I) Keps nut, repeat this at the remaining (3) aster locations and securely tighten.

As picture, put wheels 7 in front, and wheels with brake at the back.

To place the Oven on the cart first remove all of the items that are inside of the grill to make lifting easier.

Use a minimum of two people when lifting the Oven onto the cart. Place one of your hands in the bottom

vent of the Oven and the other under the grill. Lifting by the hinge or the side tables could result in injury

and damage to the product.

Position the nest upright on a flat level surface with the help of an assistant you can now place the oven

into the nest. Position the oven so the vent door is accessible between two of the risers and gently push

downward on the oven to seat it in the nest.

4 en 5

2 en 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of The Columbus Kamado in the language / languages: German, Dutch, Spanish as an attachment in your email.

The manual is 6.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of The Columbus Kamado

The Columbus Kamado User Manual - German, Dutch - 32 pages

The Columbus Kamado User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

The Columbus Kamado Manual

Product: