779728
12
Zoom out
Zoom in
Previous page
1/42
Next page
2322
Projection Alarm Clock Radio with USB charging function Projection Alarm Clock Radio with USB charging function
Set the minutes in the same way.
Confirm with the AL button.
OFF (default) appears on the display. The alarm is deactivated.
You can select your respective alarm setting by pressing the or button:
rd = Wake up with radio
bu = Wake up with alarm sound
Confirm with the AL button.
Set the alarm time for the second alarm in the same way.
When the alarm is activated, the respective alarm symbol will appear on the display.
When the set alarm time is reached, the alarm clock will wake you up with the selected setting.
Press the AL or RADIO/SLEEP button and the alarm will stop.
If the alarm is not stopped manually, the alarm tone automatically turns off after 5 minutes and will be
reactivated at the same set time on the following day.
The alarm symbol remains on the display.
You can activate the snooze function by pressing the SNOOZE/DIMMER button.
The alarm symbol will be flashing and the alarm will be interrupted for the set time (see 7.1).
To deactivate the alarm function turn off the alarm function in the respective alarm mode (OFF). The
alarm symbol disappears.
8. Radio operation
Push the RADIO/SLEEP button to switch on the radio.
The display is illuminated and all LCD segments appear briefly.
The device is ready for use.
Remove the protective film off the display.
The clock must be set to the current time in setting mode.
7. Settings
Press and hold the or button in setting mode for fast mode.
The device will automatically quit the setting mode if no button is pressed for 20 seconds.
7.1 Setting of the time and snooze interval
Press and hold the SET button for three seconds.
The hour digit will be flashing. Press the or button to adjust hours.
Press the SET button again to make the settings in the following sequence: the minutes, the 12 or 24
hours system (24 Hr - default) and the snooze interval from 5 to 60 minutes (09 - default) and adjust it
with the or button.
7.2 Alarm time setting
Press the AL button in normal mode to enter the alarm mode.
6:00 (default) or the last adjusted alarm time and the alarm symbol 1 appear on the display.
The hour digits flash.
Press the or button to adjust the hours.
Confirm with the AL button.
TFA_No. 60.5015_Anleitung 17.09.2019 16:06 Uhr Seite 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 60.5015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 60.5015 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info