576821
2
Zoom out
Zoom in
Previous page
1/2
Next page
Year (flashing)
"Date. Month
."
(for 24h time
display)
"Month. Date
."
(for 12h time
display)
Alarm symbol (ON)
Alarm time
Note:
By a successfully reception of the DCF signal and if the DCF
reception is activated (ON), the manually set time will be overwritten.
During the reception the DCF symbol will be flashing. If the reception
is not successfully received, the DCF symbol disappears. The next
attempt will be held at the next full hour.
CALENDAR SETTING
The date default is 1. 1. of the year 2013. Once the radio-controlled
time signals are received, the date is automatically updated. However,
if the signals are not received, the date can also be set manually.
1. The year digit will be flashing. Use the + button, to set the year
required. The range runs from 2013 to 2049 (default is 2013).
2. Press the SET button to enter the month setting.
3. The month digit will be flashing. Press the + button to set the
month.
4. Press the SET button to enter the day setting.
5. The day digit will be flashing. Press the + button to set the day.
6. Confirm with the SET button and enter the Snooze setting.
SNOOZE SETTING
The snooze time can be deactivated (OFF) or set to a maximum time
of 30 minutes (default is10 minutes):
1. The snooze time digit (in minute) will be flashing. Use the +
button to set the snooze time. The settings are: 5, 10 (default),
15, 20, 25, 30. The snooze can also be deactivated (OFF).
OFF appears in the display.
2. Confirm the setting with the SET button and enter the ºC/ºF
temperature unit setting.
Note:
If the snooze time has been set “OFF”, the snooze function cannot be
activated.
°C/°F TEMPERATURE UNIT SETTING
The default is °C (degree Celsius). To select °F (degree Fahrenheit):
1. Press the + button meanwhile the “C will be flashing to toggle
between “°C” and “°F”.
2. Confirm with the SET button and enter the Air quality alert
setting.
AIR QUALITY ALERT SETTING
The air quality monitor has 3 alert settings (default OFF):
ALL: LED alert light with alert sound
OFF: Alert deactivated (no LED alert flashing, no alert sound)
LED: LED alert flashing only
1. The setting will be flashing. Use the + button to set the required
setting (ALL, LED, OFF).
2. Confirm with the SET button and exit the manual settings.
Note:
If the air quality alert has been set to “ALL” or “LED”:
Equivalent CO
2
ppm
> 1500ppm:
LED alert will be flashing at a slower speed (1.5 seconds) and
no alert sound.
Equivalent CO
2
ppm
> 2000ppm:
LED alert will be flashing at faster speed (0.5 seconds) and has
an alert sound. (Alert will sound only if the air quality setting
has been set to ALL).
Note about the air quality alert:
The air quality alert will sound for a maximum duration of 30
minutes. To stop the alert, press any button.
If the clock alarm or the DCF reception occurs while the air
quality is on alert mode, the air quality alert sound stops and
the LED flashing will momentarily stop. It will restart once the
clock alarm is stopped, or after the DCF time reception is done.
ALARM SETTING
Press the MODE button in normal mode to toggle to the alarm display.
1. Press and hold ALARM button for about 3 seconds until the
alarm time display will be flashing.
2. The hour digit will be flashing. Press the + button to adjust the
hour.
3. Press the ALARM button and the minute digit will be flashing.
Press the
+
button to set the minute.
4. Press again the ALARM button to confirm the setting and exit
the alarm setting.
Note:
To activate/ deactivate the alarm function, press the ALARM
button once in normal mode. The display of the alarm symbol
represents that the alarm is activated "ON".
The duration of alarm sounding is 180 seconds.
TO ACTIVATE THE SNOOZE FUNCTION AND
STOPPING THE ALARM:
1. When the alarm is sounding, press the SNOOZE button to
activate the snooze function. The alarm will stop and re-
activate after the time interval of the snooze time pre-set by the
user.
2. To stop the alarm completely, press any button except the
SNOOZE button.
CARE AND MAINTENANCE
Clean the instrument with a soft damp cloth. Do not use
solvents or scouring agents. Protect it from moisture.
Remove the batteries if you do not use the product for a long
period of time
BATTERY REPLACEMENT
Replace the batteries, when the battery symbol appears on the
top right side of the LCD.
TROUBLESHOOTING
Problems Solution
No indication on the
device
Ensure batteries polarity are
correct
Change the batteries
No DCF reception
Time reception setting “ON”
Choose another place for the
device
Manual time setting
Wait for attempted reception
during the night
Incorrect display
Change the batteries
WASTE DISPOSAL
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them
to your retail store or to appropriate collection sites
according on national or local regulations in order to
protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
Please do not dispose of this product with other
household waste. The user is obligated to take end-
of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in
order to ensure environmentally-compatible disposal.
SPECIFICATIONS:
Recommended temperature range:
+5ºC to +40ºC / +41ºF to 104ºF
Temperature measuring range:
Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution /
14.1ºF to +139.8ºF with 0.2ºF resolution
(OFL displayed if outside this range. In degree F
display, OFL will displayed when over 99.9ºF)
Relative humidity measuring range:
Indoor : 20% to 95% with 1% resolution (display “- -“ if
temperature is OFL, except when the temperature is
100ºF to 139.8ºF; display “19%” if < 20% and “96%”
if > 95%)
Equivalent CO
2
ppm measuring range:
450ppm to 6950ppm with 50ppm resolution (display OFL > 6950ppm)
Measuring intervals:
Indoor temperature checking interval : every 16 seconds
Indoor humidity checking interval : every 16 seconds
Air quality level checking interval : every 3 minutes
Power consumption: 2 x C, IEC LR14, 1.5V
Dimensions (L x W x H): 149.4 x 49 x 83.7mm
TFA Dostmann GmbH & Co. KG, Zum Ottersberg 12, D - 97877
Wertheim
No part of this manual may be reproduced without written consent of
TFA Dostmann. The technical data are correct at the time of going to
print and may change without prior notice.
DECLARATION OF CONFORMITY
Herewith we declare, that this wireless transmission device does
comply with the essentials requirements of R&TTE Directive
1999/5/EC.
A copy of the signed and dated Declaration of Conformity is available
on request via info@tfa-dostmann.de.
www.tfa-dostmann.de
11/13
Flashing
Flashing
“ALL” flashing
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 60.2527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 60.2527 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 60.2527

TFA 60.2527 User Manual - German - 2 pages

TFA 60.2527 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info