659021
11
Zoom out
Zoom in
Previous page
1/32
Next page
Radio-controlled clock
Radio-controlled clock
2120
7.3 Setting of alarm clock
Press and hold ALARM button.
A brief beep tone will sound.
flashes on the LCD of the display.
The hour digit is flashing. Press UP or DOWN button to adjust the hours.
Press ALARM button again and you can adjust the minutes with the UP or DOWN
button.
Confirm with ALARM button.
The display shows the current time.
Press ALARM button again and the alarm function is activated.
appears on the display.
Once the alarm starts to ring (3 different sounds), you can stop the alarm by
pressing any button.
You can activate the snooze function by pressing the SNOOZE/BRIGHTNESS but-
ton on the top.
flashes and the alarm will be interrupted for 4 minutes.
To turn off the alarm function, press again the ALARM button.
7.4 Backlight
To activate the brightness of the backlight (2 levels), press SNOOZE/BRIGHTNESS
button.
8. Care and maintenance
Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect
from moisture.
Remove the batteries if you do not use the product for a lengthy period.
Keep the instrument in a dry place.
7. Operation
Important: Buttons will not function while scanning DCF signal.
During the operation, all successful settings will be confirmed by a brief beep
tone.
The instrument will automatically quit the setting mode if no button is pressed
within 20 seconds.
Press and hold UP or DOWN button in the setting mode for fast running.
7.1 Manual setting of clock, time zone and calendar
Press and hold SET button in normal mode. A brief beep tone will sound. 00 is
flashing. Press UP or DOWN buttons the time zone (+12/-12).
The time zone setting is needed for countries where the DCF signal can be
received but the time zone is different from the German time.
Press SET button to make the settings in the following sequence: Hours, minutes,
year, month and day. Press UP or DOWN button to adjust it.
Confirm with SET button.
The manually set time will be overwritten by the DCF time when the signal is
received successfully
Press SET button to change between time and date (DATE appears on the dis-
play).
7.2 12 and 24 hours system indication
Press DOWN button in normal mode to choose 12 HR or 24 HR system.
A brief beep tone will sound.
In 12 HR system AM or PM appears on the display.
TFA_No. 60.2505 Anleitung_01/12 24.01.2012 10:33 Uhr Seite 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 60.2505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 60.2505 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info