659007

TFA 60.2011 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
1514
Digital alarm clock with room climate
Digital alarm clock with room climate
•
Confirm the setting with MODE button.
•
The month digit is flashing. Press UP or DOWN buttons to adjust the month.
•
Confirm with MODE button.
•
The day digit is flashing. Press UP or DOWN buttons to adjust the day.
•
Confirm with MODE button.
•
Press MODE button again to return to time mode.
7.3 Temperature display
•
Press DOWN or °C/°F button to toggle between ° C or ° F as temperature unit.
7.4 Setting of alarm clock
•
Press MODE button twice in time mode.
•
appears on the display.
•
Press and hold MODE button for 3 seconds.
•
The hour digit and the alarm symbol are flashing. Press UP or DOWN buttons to
adjust the hours.
•
Confirm the setting with MODE button.
•
The minute digit and the alarm symbol are flashing. Press UP or DOWN buttons to
adjust the minutes.
•
Confirm with MODE button.
•
Press MODE button again to return to time mode.
•
To activate the alarm press UP button.
•
The current time and the alarm symbol appear on the display.
•
Press UP button again and the alarm is disabled.
•
The alarm symbol disappears on the display.
•
When the alarm rings (4 different, increasing alarm levels), the alarm symbol flashes.
•
You can stop the alarm by pressing any button.
•
You can activate the snooze function by pressing the LIGHT/SNZ button on the base
or on the backside.
•
The alarm symbol is flashing and the alarm will be interrupted for 8 minutes.
7.5 MAX/MIN function
•
Press MAX/MIN button.
•
MAX appears on the display. The highest temperature and humidity values appear
on the display.
•
Press MAX/MIN button again.
•
MIN appears on the display. The lowest temperature and humidity values appear on
the display.
•
The MAX-MIN values are automatically reset at midnight.
•
Press MAX/MIN button again to return to the actual display.
7.6 Comfort level
On the display appears a Smiley to indicate the comfort level.
DRY < 40%
☺
OPTIMAL INDOOR CLIMATE 40 - 70% 20 °C…26 °C
WET > 70%
No display 40 - 70% <20 °C, >26 °C
8. Battery replacement on battery operation
•
Replace the batteries when the display becomes weak.
•
Open the battery compartment and insert three new batteries 3 x 1,5 V AAA. Ensure
battery polarity is correct.
9. Care and maintenance
•
Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect from
moisture.
•
Remove the batteries and pull out the plug of the socket, if you do not use the pro-
duct for a lengthy period.
•
Keep the instrument in a dry place.
10. Troubleshooting
Problems Solution
No display ➜ Connect unit to mains adapter
Battery operation:
➜ Ensure batteries polarity are correct
➜ Change batteries
Incorrect display ➜ Restart the instrument
Battery operation:
➜ Change batteries
If your device fails to work despite these measures contact the supplier from whom you
purchased it.
TFA_No_60.2011_Anl_ 13.01.2012 10:08 Uhr Seite 8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 60.2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 60.2011 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info