Kat. Nr. 43.2034
Thank you for choosing this instrument from TFA.
1. Before you start using it
•
Please make sure to read the instruction manual carefully.
•
Following and respecting the instructions in your manual will prevent dam-
age to your instrument and loss of your statutory rights arising from defects
due to incorrect use. We shall not be liable for any damage occurring as a
result of non following of these instructions.
•
Please take particular note of the safety advice!
•
Please keep this instruction manual for future reference.
2. Field of operation and all the benefits of your new instrument at a
glance
•
Night light with IR motion sensor (16 LEDs)
•
Flashlight - always handy in the right place, at once bright light without turn-
ing on
•
Automatic emergency lighting during a power outage
•
Comfortable charging at the socket (by induction)
•
Built-in rechargeable battery
•
Light time about 1,5 hours
3. For your safety
•
This product is exclusively intended for the field of application described
above. It should only be used as described within these instructions.
•
Unauthorized repairs, modifications or changes to the product are prohibited.
•
The product is for home use only.
Caution!
ƽ
Risk of injury:
•
Do not shine directly into the eyes with the flashlight.
•
Keep this instrument and the charging station out of the reach of children.
•
Protect the flashlight from overheating! Do not leave the flashlight on un-
attended.
•
After removing the flashlight from the charging station, the lower side is
heated by the charging.
•
Make sure that the flashlight is cooled off before touching it. Turn off the
flashlight after use.
Risk of burns!
Caution!
ƽ
Risk of electrocution:
•
Plug the charging station only into a socket installed in regulation manner
and with a mains voltage of 230V!
•
The charging station must not come into contact with water or moisture. It
should be operated in dry interiors.
•
Do not use the charging station if the housing or the mains adapter are dam-
aged.
•
Keep the charging station out of reach of persons (including children) who
cannot fully appreciate the potential risks of handling electrical equipment.
•
Pull the charging station out of the socket immediately if any fault occurs or
if the charging station is not used for a long period of time.
•
Only use the supplied charging station for the flashlight.
ƽ
Important information on product safety!
•
Do not place your product near extreme temperatures, vibrations or shocks.
•
Protect it from moisture.
4. Operation
•
Please charge it fully before the first use.
•
If the luminosity decreases, put the flashlight to the charging station.
4.1 Charging of the LED multi-function safety lamp
•
Plug the charging station into a socket.
•
Put the flashlight for charging with the lower side in the charging station.
The 16-LED lights show to the front.
•
To fully charge let the flashlight for at least 8 hours in the connected charg-
ing station.
•
The charging process is completed automatically.
4.2 Use as a LED flashlight
•
Remove the flashlight from the charging station.
•
When removing the flashlight the 16 LED lights turn on automatically.
•
Press the ON/OFF button to switch off the 16 LED lights and to turn on the
2 LED lights (above).
•
Press the ON/OFF button again, to switch off the flashlight.
4.3 Use as an infrared motion sensor
•
Plug the charging station into a wall outlet. For the best effect sensor, the
socket should be located about 1.5 m above the ground.
•
Put the flashlight with the 16-LED light forward into the charging station.
•
Does the infrared motion sensor detect a movement about 2 to 3 m in front
of the sensor, the 16-LED lights will turn on automatically.
•
The device has a light sensor to turn on the light automatically at dark.
•
The LED flashlight will turn off automatically after a few seconds.
4.4 Use as an emergency light
•
During a power outage, the 16-LED lamps turn on automatically.
5. Waste disposal
This product has been manufactured using high-grade materials and compo-
nents which can be recycled and reused.
This instrument is labeled in accordance with the EU Waste Electri-
cal and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated collec-
tion point for the disposal of electrical and electronic equipment, in
order to ensure environmentally-compatible disposal.
6. Specifications
LED lamps
2-LED-lights: 35 Lumen
16-LED-lights: 40 Lumen
Range: up to 3 m
Operating time: 2-LED-lights / 16-LED-lights – 1.5 hours
Infrared motion sensor
Distance / angle: 2 – 3 m /60°
Quiescent current: ≤20µA
Illumination time: approx. 25 seconds
Power consumption: Charging station: AC 220-240V / 50HZ / 0.015A
Battery: 502030 Li-ion Battery 3.7 V/ 500 mAh
Charging time: 8-10 hours
Dimension: 60 (63) x 28 (80) x 132 (134) mm
Weight: 118 g (instrument only)
TFA Dostmann GmbH & Co. KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The
technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about your product can be found by entering your
product number on our homepage.
www.tfa-dostmann.de 09/14
A: 2-LED-lights (on top)
B: 16-LED-lights (in front)
C: ON/OFF button
D: IR motion sensor
E: Induction contact for the
charging station
RoHS
Instruction manualLED multi-function safety lamp
A
D
B
C
E
TFA_No. 43.2034_Anleitung_09/14 08.10.2014 10:27 Uhr Seite 2
