669386
11
Zoom out
Zoom in
Previous page
1/14
Next page
2120
THERMO-TIMER
E) Timer/Temperature control pair number
F) Timer/Temperature control disabled
G) °C icon
6. Operation
6.1 Reset key ([set] + [mode] key)
For the first operation press [set] and [mode] at the
same time for 7 seconds. All data are deleted and the
display shows the full segment display for approx.
3 seconds.
6.2 Time setting
To set the time, e.g. on first operation, after changing
the battery or for the change of summer/winter time,
etc. please proceed as follows:
Enter this mode in normal clock or temperature dis-
play mode.
Press the [set] key once, an icon “C “will be flashing.
This is the set clock mode. Hours and minutes can
now be entered by pressing the keys [h] and [h].
Press the [set] key once to confirm and to return to
normal clock display.
6.3 Toggle between time and temperature
The display can be toggled between time and tempe-
rature by pressing the [mode] key.
7. Set the control mode
There are in total three control modes of operation
selectable by the user to fit his application require-
ment:
7.1 Mode 1
Thermo-mode ”
The device switches itself on when the temperature falls
below the one set by the user; and switches itself back
off when the temperature exceeds this same value.
THERMO-TIMER
When using the Thermo or Thermo-Timer mode,
open the cable compartment at the bottom of the unit
and allow approx. 5 cm of the sensor cable to come
out of the unit.
There is a slot through which the cable can be passed
on the left side of the cable cover. The maximum
cable length is 1 m.
Enable Thermo-mode ”
The display shows the time or the current temperature.
a) Press the [set] key once to see the symbol “C” flash-
ing.
b) Press the [mode] key repeatedly until 18 °C (default)
appears on the display as well as a flashing ” . The
temperature value can now be changed up or down
with the [h] or the [m] keys. The temperature range is
from 0 °C to 40 °C.
c) After the desired value is set, press [set] key once to
leave the temperature set mode and return to normal
temperature display mode. ” “ is now steadily shown.
Disable Thermo-mode
a) Press the [set] key once, the same way as for setting
the time.
b) Now press the [mode] key until the display shows the
set temperature with the flashing ” “. Use the [manu-
al] key to deactivate the switching temperature. The
display shows “X”. The previously set values are
retained. By pressing the [manual] key again, the “X”
on the display disappears and the thermo-mode is
active again.
c) After the desired setting, press the [set] key.
When Thermo-mode is switched off, you can manually
turn off the unit on the mains by pressing the [manual]
key. The yellow LED indicates whether the device is
switched on or off.
TFA_No. 37.3000_Anleit_11_16 21.11.2016 16:30 Uhr Seite 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 37.3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 37.3000 in the language / languages: English, German as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info