658125
14
Zoom out
Zoom in
Previous page
1/46
Next page
2726
CULT – Wireless Weather Station
The hour digit is flashing. Press or button to adjust hours.
Press alarm button again and adjust the minutes with the or
button.
Confirm with alarm button.
Alarm time and W appears on the display. The alarm is activated.
7.5.2 Setting of the special alarm time
Press alarm button again.
S (alarm time for Saturday, Sunday or special alarm time) and
OFF or the last adjusted alarm time appear on the display.
Press and hold alarm button.
Set the alarm time in the same way.
Confirm with alarm button.
Alarm time and S appear on the display. The alarm is activated.
7.5.3 Setting the alarm for frost alert
(outdoor temperature at transmitter 1: 0°C)
Press alarm button again.
PRE-AL and OFF appear on the display.
Press and hold alarm button.
Select with or button, if you want to be woken up earlier 15, 30,
45, 60 or 90 minutes by risk of frost.
Confirm with alarm button.
7.5.4 Activate/turn off the different alarm times
Press mode button and you will return to normal mode.
The alarm time and the activated alarm symbols (S/W/PRE-AL) appear
on the display.
Once the alarm starts to ring, W,S and/or PRE-AL flashes.
Press alarm button to stop the alarm.
The alarm stays active from Monday until Friday (W).
Please consider that you have to activate the weekend or special
alarm time (S) always new.
To turn off the alarm function, press button in the respective alarm
mode.
OFF appears on the display.
CULT – Wireless Weather Station
To activate an alarm press button in the respective alarm mode.
The alarm time appears on the display.
To activate the alarm by risk of frost (PRE-AL) at least one alarm time
(S/W) has to be activated.
7.6 Temperature mode
Press the or button to enter the respective display area. When
changing the display area a brief beep tone will sound.
IN flashes on the display.
You are now in temperature mode.
7.7 Max/Min function
Press mem button in temperature mode and the lowest outdoor and
indoor temperature are displayed since the last reset.
MIN appears on the display.
Press mem button and the highest outdoor and indoor temperature
are displayed since the last reset.
MAX appears on the display.
Press mem button again and you will return to normal mode.
Press and hold mem button (approx. 3 sec.) in MAX/MIN-mode to
clear the recorded MAX/MIN readings.
The display shows the current temperature.
7.8 Temperature display
Press and hold mode button in temperature mode to select °C (Cel-
sius) or °F (Fahrenheit) as the temperature unit.
7.9 Trend pointers temperature
The trend pointers displayed on the LCD indicate if the temperature
values are increasing, steady or decreasing.
7.10 Outdoor temperature alarm
Press alarm button in temperature mode to enter the temperature
alarm function.
and OFF or the last adjusted upper temperature limit is indicated.
Press and hold alarm button for 3 seconds to enter the setting mode.
TFA_No_35.1116_Anl_ 31.01.2012 21:04 Uhr Seite 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1116 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info