36
AXIS – Radiografisch weerstation
╟
6. Batterijwissel
• Als de batterij ontladen is verschijnt ”Aanduiding batterijstand”
in de display (RX = basisstation, TX = buitenzender)
• Vervangt u de batterijen in de zender, moet u ook de batterijen in
het basisstation opnieuw inzetten om de sensor opnieuw te laten
leren.
• Gebruik Alkaline batterijen. Controleer of de batterijen met de
juiste poolrichtingen zijn geplaatst. Zwakke batterijen moeten zo
snel mogelijk worden vervangen om het lekken van de batterijen
te voorkomen.
Attentie: Batterijen en technische apparaten mogen niet met het
huisvuil worden weggegooid. Breng ze naar de inzamelplaatsen
of bij uw detaillist naar de daarvoor bestemde containers volgens
de nationale of lokale bepalingen.
7. Technische gegevens
Zendbereik vrij veld: 100 meter max.
Frequentie: 433 MHz
Meetinterval sensor: 48 s
Tijdsduur alarm: 120 s
Temperatuur
Meeteenheid: °C/°F
Meetbereik buiten: -40…+65°C / -40…+149°F
(aanduiding OFL buiten
het meetbereik)
Meetbereik binnen: -10…+80°C / 14…+176°F
(aanduiding OFL buiten
het meetbereik)
Luchtvochtigheid
Meeteenheid: %RV
Meetbereik: 20% tot 99% RV
Batterijen
Basisstation: 2 x AA 1,5V LR6
alkalibatterij
Zender: 2 x AA A 1,5V LR6
alkalibatterij
8. Garantie
• Lees de gebruiksaanwijzing voor u het apparaat gebruikt.
• Functioneert het station niet correct, herneem dan de ingebruik-
stelling vanaf het begin. Vervang de batterijen.
• Houd het apparaat op een afstand van andere elektronische
apparaten en grote metaaldelen.
• Vermijd extreme temperaturen, trillingen en directe weersinvloe-
den.
• Het apparaat is geen speelgoed. Bewaar het buiten de reikwijdte
van kinderen.
AXIS – Wireless weather station
╞
13
2. 12/24 hour format
3. Manual time setting (hours/minutes)
4. Calendar setting(year /month/ date, weekday will be calculated
thus no need to set weekday)
5. Temperature display unit degree Celsius or Fahrenheit
6. Pressure threshold setting (default 3hPa, see 4.4)
4.2 Alarm clock function
• Press twice ”+/CH” key in normal mode. Alarm Time (“AL”) appears
on the LCD.
• When viewing the Alarm Time, hold “SET/MODE” button for
3 seconds to enter Alarm Time setting. Press ”+/CH” key or
”-/MIN/MAX” key to adjust the alarm time. Confirm hours with
“SET/MODE” button and switch to minutes setting. Confirm with
“SET/MODE”.
• Press “-/MIN/MAX key to switch alarm on or off. If it is on, “ ”
is shown on the LCD.
• Press any button to stop the alarm (120 sec).
4.3 Min/Max Mode
4.3.1 Indoor Temperture & Humidity
• Press the ”SET/MODE” key to make the arrow point to INDOOR
TEMPERATURE & HUMIDITY display section
• Press the ”-/MIN/MAX” key to display the following values:
• Indoor temperature maximum
• Indoor temperature minimum
• Indoor humidity maximum
• Indoor humidity minimum
• Press the ”-/MIN/MAX” key for 3 seconds, the above individual
minimum or maximum record will be reset to zero.
4.3.2 Outdoor Temperature Mode
• Press the ”SET/MODE” key to make the arrow point to OUTDOOR
TEMPERATURE display section
• Press and release ”CH/+” key to toggle between the outdoor
sensor 1,2,3 ( If more than 1 sensor is used )
• Press the ”-/MIN/MAX” key to display the following values:
• Current channel outdoor temperature maximum
• Current channel outdoor temperature minimum
• Press the ”-/MIN/MAX” key for 3 seconds, the above individual
minimum or maximum record will be reset to zero.
4.4 Wettervorhersage
sunny partly
cloudy
cloudy rainy