466142
13
Zoom out
Zoom in
Previous page
1/16
Next page
31
The bar chart indicates the air pressure history trend over the last 24 hours in 7 steps, 0h, -
3h, -6h, -9h, -12h, -18h, and -24h. The “0h” represents the current full hour air pressure
recording. The columns represent the “hPa” (0, ±2, ±4, ±6) at specific time. The “0” in the
middle of this scale is equal to the current pressure and each change (±2, ±4, ±6) represents
how high or low in “hPa“ the past pressure was compared to the current pressure.
If the bars are rising it means that the weather is getting better due to the increase of air
pressure. If the bars go down, it means the air pressure has dropped and the weather is
expected to get worse from the present time “0h“.
Note:
For accurate barometric pressure trends, the Weather Station should operate at the same
altitude for example, it should not be moved from the ground to the second floor of the
house. Should the unit be moved to a new location, discard readings for the next 12-24
hours.
OUTDOOR TEMPERATURE/HUMIDITY DATA
The fourth LCD section shows the outdoor temperature and humidity, the reception indicator,
the transmitter identification number and the MIN/MAX outdoor data.
TOGGLING AND RESETTING THE OUTDOOR DATA
1.
To toggle between the outdoor current, MAX/MIN temperature and humidity data and
the times (for temperature data only) they were recorded press the OUT/+ key:
Once to show the MAX outdoor temperature and humidity data with the recorded
time and date.
Twice to show the MIN outdoor temperature and humidity data with the recorded
time and date.
Three times to return to the current displayed values.
2. Once the MIN or MAX data is displayed, press and hold the SET key for 3 seconds to
reset the respective MIN or MAX record to current temperature and humidity data, and
current time, date display.
Note: The MIN or MAX data needs to be reset individually.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS
When more than 1 transmitter used:
1. To toggle between transmitters, press the SNOOZE/CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2. Use OUT/+ key to view the MIN/MAX temperature and humidity data for the selected
transmitter.
3. To reset the minimum and maximum temperature and humidity data, and the times at
which they were recorded, press the SET key continuously for about 3 seconds. This
will reset the MIN/MAX data recorded to the current time, date, temperature and
humidity. The current time taken is the normal displayed time and does not regard the
time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
Outdoor
temperature in
°C/ °F
Outdoor relative
humidity in RH%
Outdoor transmitter identification number
MIN icon
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1045.IT - Laluna Funk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1045.IT - Laluna Funk in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1045.IT - Laluna Funk

TFA 35.1045.IT - Laluna Funk User Manual - German - 18 pages

TFA 35.1045.IT - Laluna Funk User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info