539601
3
Zoom out
Zoom in
Previous page
1/15
Next page
20
batteries in the Weather Station above). Once the batteries are in
place, all segments of the LCD will light up briefly and a short signal
tone will sound. Following the indoor temperature/humidity and the
time as 0:00 will be displayed. If these information are not displayed
on the LCD after 60 seconds, remove the batteries and wait for at
least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start
receiving data signal from the transmitter. The outdoor temperature
data should then be displayed on the Weather station. If this does
not happen after 2 minutes, the batteries will need to be removed
from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the
distance between the Weather Station and the transmitter should
not be more than 100 meters (see notes on “Positioning” and “868
MHz Reception”).
Note:
In the event of changing batteries of the units, ensure the batteries do not
spring free from the contacts. Always wait at least 1 minute after removing
the batteries before reinserting, otherwise start up and transmission
problems may occur.
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and
transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the
batteries in the Weather Station. Once the batteries are in place, all
segments of the LCD will light up briefly and a short signal tine will
sound. Following the indoor temperature/humidity and the time as
0:00 will be displayed. If these information are not displayed on the
LCD after 60 seconds, remove the batteries from both units and wait
for at least 60 seconds before reinserting them.
4. The outdoor temperature data from the first transmitter (channel 1)
should then be displayed on the Weather Station. Also, the signal
reception icon will be displayed. If this does not happen after 2
minutes, the batteries will need to be removed from both units and
reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor
temperature readings from the first transmitter are displayed on the
Weather Station.
Note :
User shall insert the batteries into the second transmitter
within 45 seconds after the Weather Station displays the information
of the first transmitter.
6. The outdoor temperature from the second transmitter and the
"channel 2" icon should then be displayed on the Weather Station. If
this does not happen after 2 minutes, the batteries will need to be
removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2"
icon and outdoor data are displayed on the Weather Station. Then
within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to
"1" once the third transmitter is successfully received. If this is not
happen, user shall restart the setting up from step 1.
Note :
User shall insert the batteries into the third transmitter within
45 seconds after the Weather Station displays the information of the
first transmitter. Or immediately after reception of the second
transmitter is finished.
8. In order to ensure sufficient 868 MHz transmission however, the
distance between the Weather Station and the transmitter should
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1044.IT Linear at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1044.IT Linear in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1044.IT Linear

TFA 35.1044.IT Linear User Manual - German - 17 pages

TFA 35.1044.IT Linear User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info