576787
6
Zoom out
Zoom in
Previous page
1/22
Next page
1110
SOUND BEE - Sound Level Meter
Please pay attention to the connection wires.
Close the battery compartment again.
All LCD segments will be displayed for about a few
seconds.
On the display appear the battery symbol and the cur-
rently measured Sound Pressure Level in dB (A).
The unit is ready for use.
The instrument will turn off automatically after 15
minutes, if no button is pressed.
Press and hold the ON/OFF button for at least 3 se-
conds to turn off the instrument immediately.
6.2 Measuring of the sound pressure and the HOLD
function
Press the ON/OFF button.
All LCD segments will be displayed for about a few se-
conds.
On the display appear the battery symbol and the
currently measured Sound Pressure Level in dB (A).
Set up the device in the direction of the sound source.
Press the MAX/MIN button to activate the HOLD func-
tion.
HOLD appears on the display.
The actual measured Sound Pressure Level stays on
the display.
Press again the button, to deactivate the HOLD func-
tion.
6.3 Reading of the maximum and minimum values
Press and hold the MAX/MIN button for at least 3 se-
conds to enter the maximum and minimum mode.
MAX appears on the display.
The highest measured Sound Pressure Level in dB (A)
will appear on the display.
Press the button again.
SOUND BEE - Sound Level Meter
Caution!
ƽ Risk of injury:
In case of loud noise, make sure you have adequately
protected your hearing.
Keep this instrument and the battery out of the reach
of children.
Batteries must not be thrown into a fire, short-circuit-
ed, taken apart or recharged. Risk of explosion!
Batteries contain harmful acids. Low batteries should
be changed as soon as possible to prevent damage
caused by leaking.
Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
ƽ Important information on product safety!
Do not place your product near extreme temperatures,
vibrations or shocks.
Protect it from moisture, sand, dirt and dust.
5. Elements
Buttons
ON/OFF button (front)
MAX/MIN button (laterally)
Housing (back)
Tripod screw
Battery compartment (screwed)
6. Operation
6.1 Getting started
Open the screw of the battery compartment (below
RoHS sign) and insert the battery 9 V. Ensure that the
battery polarity is correct.
TFA_No. 31.2003 Anleitung_06_14 26.06.2014 11:30 Uhr Seite 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 31.2003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 31.2003 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info