Manual TFA 31.1122 (page 5 of 14) (English, German, Dutch, French, Italian, Spanish)

576773

Zoom out

Zoom in

1/14

ScanTemp 380 – Infrared Thermometer

╞

Safety Cautions:

ƽ EMC/RFI

•

Protect the unit from EMI (Electro

Magnetic Interference) from induc-

tion heaters and microwave ovens

and Electro Static Discharge. Rea-

dings may be affected if the unit is

operated within a radio frequency

electromagnetic field strength of

approximately 3 volts per meter, but the performance of

the instrument will not be permanently affected.

Attention:

• Do not look directly into the laser beam – permanent

eye damage may result.

• Keep out of the reach of children

• Protect the unit from “thermal shock” (caused by large

or abrupt ambient temperature changes).

• Do not leave the unit on or near objects of high tempe-

rature.

• Not recommended for taking human temperature.

Battery:

• Change the battery when the middle or right battery

power symbol appears on the display (2 x 1,5 Volt AAA).

• Remove the battery compartment sliding the cover

downward. Attention: Confirm the unit is power off

before changing battery.

• Do not dispose of empty batteries in household waste.

Please do not dispose of old electronic devices and used

batteries in household waste. To protect the environ-

ment, take them to your retail store or to nearest civic

amenity site to be disposed of according to national or

local regulations.

Trouble Shooting:

The temperature is out of the permissible measuring range.

Er2: The ambient temperature is rapidly changing.

Er3: The ambient temperature is beyond

0..+50°C (32..122°F).

Please wait 30 minutes until the instrument

has settled at the

new ambient temperature.

All other error messages:

➞ Confirm the unit is power off before.

➞ Remove the battery for 1 minute, then

repower it.

➞ If the error message does not disappear,

contact the retailer for further service

Reminders:

• Not recommended for use in measuring shiny or polished

metal surfaces (stainless steel, aluminum, etc.)

• The unit cannot measure through transparent surfaces

such as glass or plastic. It will measure the surface tem-

perature of the glass instead.

• Steam, dust, smoke, etc., can prevent accurate measure-

ment by obstructing the unit’s optics.

Care and Cleaning:

• The Sensor Lens is the most delicate part of the thermo-

meter. Please protect the sensor part from dirt. Gently

clean it with a soft cloth moistened with water or medi-

cal alcohol.

• Avoid splashes and spills on the unit.

• Store at a temperature of between -20°C to +65°C.

ScanTemp 380 – Infrared Thermometer

╞

Battery OK Battery almost

exhausted

replace

soon

Battery

exhausted

replace

at once

°C

TFA Anl. No. 31.1122 06.07.2007 10:49 Uhr Seite 5 (Schwarz/Process Black Bogen)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TFA 31.1122 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TFA 31.1122 Manual

Product: