Manual TFA 30.5022 KlimaLogg Base (page 36 of 43) (English)

577032

Zoom out

Zoom in

1/43

CLEARING ALL DATA AND SETTINGS OF THE TEMPERATURE STATION FROM THE

PERMANENT MEMORY (FACTORY RESET)

The factory reset needs to be launched if malfunction on the temperature station occurs.

To reset the temperature station:

1. Ensure that the unit is in normal display, not displaying max, min, or history. And the unit is not

making any DCF or HF reception.

2. Press the OK, Plus, Minus and Mode key and hold for 3 seconds in following orders. The OK key

must be pressed and hold first, then the other three key must be pressed and hold also within 1s.

Then hold the four keys for 3 seconds until you see running digits at bottom right area of LCD.

Note: If the reset is not successfully initiated, user shall try from above step 1. again

3. The running digits will be displayed for about 6 minutes, followed by the full segment display. User

is then required to remove and re-insert batteries to complete the restart the unit.

Immediately press these

3 keys at the same time.

Then hold the 4 keys

together for about 3

seconds.

Press and hold OK key first

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.5022 KlimaLogg Base in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TFA 30.5022 KlimaLogg Base Manual

Product: