658228
12
Zoom out
Zoom in
Previous page
1/44
Next page
2322
TRINITY - Wireless thermo-hygrometer
TRINITY - Wireless thermo-hygrometer
6.2 Transmitter reception
After the batteries are inserted the base station will automatically receive the measured values. The
reception symbol will be flashing on the display.
If the reception of the measured values fails, “- -"”appears on the display. Check the batteries and try
it again. Check if there is any source of interference.
As soon as the base station receives the radio-controlled time, you can start the transmitter's manu-
al initialization. Press and hold the CHANNEL button for four seconds. The base station tries to
receive the measured values.
Press the TX button to transmit the measured values manually.
6.3 Radio-controlled time reception
After the base station has completed searching for the transmitter, the device starts scanning the
DCF signal and the DCF reception symbol will be flashing.
When the time code is successfully received after 2-10 minutes, the radio-controlled time, the date,
the DST (if applicable) and the DCF symbols will be shown steadily on the display.
The DCF reception always takes place hourly between 1:00 and 5:00 o'clock in the morning. If the
reception is not successfully received until 5:00 o'clock, the next DCF reception attempt will happen
at 1:00 o'clock in the following morning.
There are three different reception symbols:
flashing – reception is active
solid – reception is very good
no symbol – no reception / set the clock manually
Housing (Fig. 2)
C 1: Battery compartment
Transmitter (Fig. 3)
D 1: Channel switch 1, 2, 3
D 2: TX button
D 3: LED signal lamp
D 4: Battery compartment
D 5: Wall mount hole
6. Getting started
6.1 Insert the batteries
Place the instruments on a desk with a distance of approximately 1.5 meters. Avoid being close to pos-
sible sources of interference such as electronic devices and radio installations.
1. Open the battery compartment of the transmitter.
2. Set the switch to the channel 1 position.
3. Insert two new AA 1,5 V batteries, polarity as illustrated.
4. Close the battery compartment carefully.
Open the battery compartment of the base station and insert two new AA 1.5V batteries, polarity as
illustrated.
All segments will be displayed briefly.
Close the battery compartment again.
TFA_No. 30.3058_Anleitung 11.07.2016 16:09 Uhr Seite 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 30.3058 Trinity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.3058 Trinity in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info