Manual TFA 30.3039.IT (page 43 of 126) (English, German, Dutch, French, Italian, Spanish)

658212

Zoom out

Zoom in

1/126

- High limit humidity („HIGH AL RH“, default 70%)

- Low limit humidity („LOW AL RH“, default 20%)

- High limit temperature (“HIGH AL °C“, default 40°C)

- Low limit temperature („LOW AL °C“, default 0°C)

 When displayed, the limit value can be changed by pressing

the “+” or “-” button.

 In order to activate an alarm limit, the “OK/MAX.MIN.” button

must be pressed while the corresponding limit value is

displayed.

 If the alarm limit is activated, the alarm on/off symbol is

displayed as active on the toolbar (not crossed out).

 If the alarm limit is not activated, the alarm on/off symbol is

displayed as inactive on the toolbar (crossed out).

 Press and hold + or - button in setting mode, you will enter

fast mode.

 To enter normal mode again, press either ALM button again

or press for at least 20 seconds no button.

Alarm function:

 In case of an alarm, Symbol ALARM (above the date) and

the corresponding channel number flashes. Also the Hi or Lo

Symbol is flashing if the corresponding channel is shown.

 If the alarm sound is activated, the symbol (bell) flashes and

the acoustic alarm will sound for 2 minutes.

 Press ALM button to stop the alarm sound.

 The corresponding “Hi” or “Lo” Symbol and ALARM continue

to flash until the corresponding value is again within the

alarm limit or the alarm limit is deactivated in alarm setting

mode.

Note:

If any alarm limit is activated (no matter which alarm limit or which

channel), “ALARM” is displayed permanently in normal mode (in the time

and date display area).

The alarm sound can be deactivated in the basic settings of the

KlimaLogg Pro if desired.

You can use the USB wireless transceiver and the PC software to easily

make all alarm settings on the PC and transfer those to the KlimaLogg

Pro.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.3039.IT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TFA 30.3039.IT Manual

Product: