636769
9
Zoom out
Zoom in
Previous page
1/14
Next page
Warning label
1. Caution! Read the instruction manual and follow the warning and safety instructions!
2. Always switch off the appliance, disconnect the power and wait till the machine comes to a
standstill prior to maintenance, cleaning or repair work!
3. Caution! Blades do not stop immediately after switching off.
4. Danger! Objects may be thrown out at high speed when motor is running. Keep people,
pets and domestic animals out of the danger area.
5. Keep the mains cable free from the tines or blades. Tines or blades may damage the
cables and cause contact with live parts.
6. Caution! Unplug immediately if the power cord or plug becomes damaged!
7. Danger! Keep hands and feet away from the cutting equipment!
8. Caution! Always wear eye and ear protection.
9. Do not use the machine in wet weather conditions!
10. Wear safe, sturdy, nonskid footwear!
Safety instructions
Please follow the safety instructions provided in this manual and ensure that you fully understand
all safety instructions. Please keep this manual for future reference or in preparation for resale.
Never move the appliance by pulling at the power socket cable.
Always disconnect the appliance from the main supply before transporting.
Always switch off the appliance before disconnecting from the power socket or extension.
All spectators should be kept at a safe distance to the machine, when it is in use.
The operator of the machine is responsible for people’s safety.
Never direct discharge at bystanders or allow anyone in front of unit.
People under the influence of alcohol, drugs or medication are not allowed to use the
machine.
Only use the machine for its designed purposes.
Always use the machine with the chute attached.
Keep hands and feet away from all rotating and moving parts such as auger etc.
Always use a rod such as a shovel or similar to clear a blocked auger. Never put your hand
inside the discharger or auger in order to remove blocked snow, debris or for other reasons.
A blocked auger can and will “fire back" when cleared and may cause personal injury.
The operator must wear boots with non-slip soles to ensure that you have a good a
foothold.
Always wear safety glasses and avoid loose-fitting clothes.
Only work in daylight or sufficiently good artificial light.
In order to start the appliance, the auger must be completely free to move.
Always hold the handle bar firmly and walk, never run.
Do not overload the appliance work load by attempting to clear snow at too fast a rate.
Slow down and turn corners slowly.
Caution! The auger does not stop immediately after switching off.
Always switch off the machine, disconnect the plug and wait until the auger stops before
carrying out maintenance or cleaning work.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas SNOW BUSTER 390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas SNOW BUSTER 390 in the language / languages: English, Danish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info