Manual Texas Smart Spreder 200 (page 14 of 25) (English, German, Danish)

636757

Zoom out

Zoom in

1/25

Operation Instructions

WARNING

Before using the spreader, review the instructions below and safety information before operating.

Failure to follow these instructions may result in property damage or injury to the operator or

bystanders.

USING YOUR SPREADER

1. Inspect your spreader before each use. Make sure the wheels turn easily when the spreader is

pushed. The hopper should be clean and free from cracks.

2. Spreader is designed to spread a range of materials (Pesticides, Pelletized Lime, Fertilizer, and

Grass Seed). Materials such as Powder, Manure, Top Soil, Gravel, and Mulch have the wrong

physical characteristics and should not be used with your spreader.

3. Do not use spreader on windy days when spreading grass seed or herbicides.

4. Determine approximate square footage of the area to be covered and estimate amount of

material required. Please refer to fertilizer manufacturer’s recommendation. Break up any

lumpy fertilizer as you fill the hopper.

5. Before filling the hopper, make sure the flow control handle is in the“0”position and the flow

control is closed.

6. Every time you are ready to stop or turn back, close the flow control to stop dispersing the

material. This reduces waste and avoids damaging the lawn with oversaturated product

overage.

7. Follow fertilizer manufacturer’s recommended coverage rate for each product.

8. To maintain the same coverage when walking at a different speed, adjust the flow rate. Reduce

the flow setting for slower speeds and increase the flow setting for higher speeds.

9. Keep spreader horizontal when operating. Tilting the spreader will result in uneven coverage.

10. Always start walking prior to opening the flow control rate.

11. Always close the flow control before turning or stopping the spreader.

12. If spreading material is accidentally deposited too heavily in a small area, soak the area

thoroughly with a garden hose or sprinkler to prevent burning of the lawn.

13. Apply two header strips at each end of area to be treated and then proceed lengthwise

between the header strips.

14. To insure consistent coverage, make sure each drop pattern slightly overlaps the previous drop

pattern.

15. When dropping material, make sure the material does not hit evergreen trees, flowers or

shrubs.

16. Do not over apply spreading material. Follow the recommended coverage rate for each

product. Over application will lead to lawn damage and contamination.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas Smart Spreder 200 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas Smart Spreder 200 Manual

Product: