Manual Texas Rider 6100E (page 21 of 23) (English, German, Danish)

636645

Zoom out

Zoom in

1/23

Troubleshooting

If your problem is not described above, please contact an approved service centre or Texas A/S.

Difficult to start

Problem

Cause

Solution

Generally difficult to start

 Wrong starting procedure

 Follow the starting instructions in the manual precisely.

The start cable is very tight (will not start)

 The brake handle is not being activated

 The machine is placed in high grass

 Activate the brake handle and pull the start cord.

 Move the machine away from the high grass and repeat the start procedure.

Set the height adjustment in the highest position, so that the blade is lifted free of

the grass.

The machine will not start when the start cord

is pulled or the electric start button is pushed

(or the starter "clicks" when attempting an

electric start)

 The brake handle is not being activated

 The wires are not connected to battery

The brake cable is incorrectly adjusted

 The machine is standing in high grass

 Engine is not primed before starting

 The choke is not in the correct position

 No more gasoline in fuel tank

 The gasoline is more than 3 months old

 Activate the engine brake handle and press the electric start button.

 Check that the wires are connected from the battery to the motor and start button.

 Adjust the engine brake cable, following the instructions in the manual.

 Move the machine away from the high grass to start it.

Tip the machine when starting.

Set the height adjustment in the highest position, so that the blade can run freely.

 Push the primer 1-3 times before starting.

 Move the choke lever to a different position.

 Check and fill fuel tank with gasoline.

 Empty the fuel tank and carburettor from old gasoline, and fill with new gasoline.

No ignition spark (cannot start)

 The spark plug cap is loose

 The spark plug is damp or dirty

 Incorrect gap between the spark plug and

the electrode

 The air filter is dirty or defective

 Check that the cap is firmly attached to the spark plug.

 Check that there is no dirt on the spark plug, following the instructions in the

manual.

 Check and adjust the spark plug gap, following the instructions in the manual.

Alternatively, replace the spark plug.

 Check the air filter for dirt and clean it, following the instructions in the manual.

The mower starts, but runs unevenly

Problem

Cause

Solution

Insufficient engine revolutions

 Lever is in the "Choke" position

 The throttle lever is set for "Turtle "

 Set the lever in the "Run" position.

 Set the throttle lever for "Rabbit".

The back wheels are not pulling, or only very

little

 The clutch cable is too tight/too loose

 The ratchets in the rear wheels are worn

 Adjust the clutch cable, following the instructions in the manual.

 Replace the ratchets.

The engine runs irregularly and/or its

performance becomes poor as you are

working

 The spark plug cap is loose

 The spark plug is dirty

 Incorrect gap between the spark plug and

the electrode

 The air filter is dirty or defective

 Evaporation of fuel in the carburettor

 Loose throttle cable

 Dirt in the carburettor

 Check that the cap is firmly attached to the spark plug.

 Check that the spark plug is clean and not damaged, following the instructions in the

manual.

 Check and adjust the spark plug gap, following the instructions in the manual.

 Check the air filter for dirt and clean it, following the instructions in the manual.

 Wait a few minutes, and then try to start again.

 Tighten the throttle cable, following the instructions in the manual.

 Clean the carburettor.

The engine will not stop

Problem

Cause

Solution

The machine does not stop after 5 seconds

 The engine brake cable runs too tightly

 Check and adjust the engine brake cable, following the instructions in the manual.

My Texas rider 6100e will not start. The motor spins on operation but will not fire up Submitted on 22-3-2018 at 15:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas Rider 6100E in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas Rider 6100E Manual

Product: