636732
16
Zoom out
Zoom in
Previous page
1/50
Next page
16
2. Prepare the logs for splitting. This log splitter splits wood in the length of 520 mm
and a diameter of 50-250 mm. When you split larger pieces do not split logs longer
than the shown size. Never attempt to split fresh green logs. Dry logs are a lot
easier to split and will not jam as frequently as green logs would.
3. Route the power cord. Locate an appropriate power outlet, and secure an
adequate extension cord if necessary. Route the cord from the splitter to the power
source in a route that safeguards the cord and ensures that the cord will not
become damaged or wet during the work session.
4. Place the splitter safely. Please ensure that the splitter is placed firmly on a level
and supported surface in a height of 60-75 cm, free from any objects to prevent
movement of the operator. Never operate this splitter on the ground, as you will risk
it becoming damaged by bits and pieces, it is also uncomfortable to work in this
position. It is recommended to use a permanent stand for the log splitter. If
necessary you can block the wheels with wedges in order to prevent them from
moving.
5. Open the air escape valve. Loosen the air escape
valve (14) by turning 3-4 times every time you use
the log splitter. Retighten this valve when you are
finished.
6. Where to place the log on the splitter.
Place the log onto the splitter, lengthwise and lying
flat on the main frame (I). The log shall lie flat on the
splitter and shall be placed onto the log guiding plates
(A). Never attempt to split the log at an angle.
Be sure that the wedge (J) and log pusher (B) touch
the log squarely on the ends.
7. Two hand operation.
When it is safe to start,
press the engine start
switch (F) with one
hand and the handle
(C) with the other
hand.
The log pusher (B) will
compress the log and
push it against the
wedge (J), which splits
the logs. When the
logs have been split
you shall release both
the engine start switch
(F) and the handle (C),
this will allow the log
pusher (B) to withdraw.
Air escape valve
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Power Split 540H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Power Split 540H in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info