636729

Texas Power Split 1000V Manual

22
Zoom out
Zoom in
Previous page
1/67
Next page
22
12. Trouble shooting
If problems arise while using your log splitter we recommend that you read the trouble
shooting part. If the process is carried out by an unauthorized person the warranty is not
valid and the manufacturer will not be responsible for any damages on persons, animals or
objects.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The log will not be split
The log has been placed
incorrectly
The log exceeds the
approved dimensions or the
log is too hard for the logs
ability.
The wedge does not split
The oil leaks
The hydraulic pressure is too
low
Place the log correctly
Split a smaller piece or use
other remedies to reduce the
size of the log.
Sharpen the wedge and
inspect for burrs and nicks
Locate the leakage by using a
piece of paper, contact your
dealer
Contact your dealer
The log pusher advances
jerkily or with strong
vibrations
Air in the circuit
Inspect the oil level. Fill up if
necessary. If the problem
continues, contact your dealer
Oil leaks from the ram or
from other external points
Leakage in the tank
The oil seal is worn
Check that the bleed screw
has been tightened before
moving the machine (fig. 6)
Contact your dealer
PLEASE READ THE FOLLOWING CAREFULLY
ALL REPAIRS AND REPLACEMENTS MUST BE CARRIED OUT BY AN AUTHORIZED
DEALER AND NOT BY THE PURCHASER. THE PURCHASER ASSUMES ALL RISKS
AND LIABLILITIES ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT OF PARTS THERETO OR INSTALLATION OF THESE.
Due to continued product development Texas A/S reserves the right to improve the
product without improving already sold models.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Power Split 1000V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Power Split 1000V in the language / languages: English, German, Danish, French, Polish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info