514296

Texas Instruments eZ430-Chronos Manual

9
Zoom out
Zoom in
Previous page
1/113
Next page
Preface
SLAU292D–November 2009–Revised March 2011
Read This First
If You Need Assistance
If you have any feedback or questions, support for the MSP430™ microcontrollers and the
eZ430-Chronos™ software development tool is provided by the Texas Instruments Product Information
Center (PIC) (see support.ti.com), the TI E2E Forum
(http://e2e.ti.com/support/microcontrollers/msp43016-bit_ultra-low_power_mcus/f/166.aspx), and the
eZ430-Chronos wiki at www.ti.com/chronoswiki. Additional device-specific information can be found on the
MSP430 web site, www.ti.com/msp430.
Related Documentation from Texas Instruments
The primary sources of MSP430 information are the device-specific data sheets and user's guides. The
most up-to-date versions of the user's guide documents available at the time of production have been
provided on the CD-ROM included with this tool. However, the most current information is found at
www.ti.com/msp430.
Information specific to the eZ430-Chronos development tool can be found at www.ti.com/chronos.
MSP430 device and IDE user's guides may be accessed on the included CD-ROM under the user's
guides section. The IDE user's guides include detailed information on setting up a project for the MSP430
using Code Composer Studio™ integrated development environment (IDE) (SLAU157) and the IAR
Embedded Workbench™ IDE (SLAU138).
FCC Warning
This equipment is intended for use in a laboratory test environment only. It generates, uses, and can
radiate radio frequency energy and has not been tested for compliance with the limits of computing
devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable
protection against radio frequency interference. Operation of this equipment in other environments may
cause interference with radio communications, in which case, the user is required to take whatever
measures may be required to correct this interference his own expense.
Export Control Regulations
This development kit is subject to the export / import control regulations of the United States per the
harmonization code: ECCN 5A002A1A TSPA. Note that it may also be subject to export
control policies of local authorities.
Patents
German utility model and patent pending.
9
SLAU292D–November 2009–Revised March 2011 Read This First
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Instruments eZ430-Chronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Instruments eZ430-Chronos in the language / languages: English as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info