636687

Texas Fusion 10TG Manual

18
Zoom out
Zoom in
Previous page
1/32
Next page
18
Technical specifications
Model Fusion 10TG / 10B
Engine 212 cc TG720 /
208 cc B&S Vanguard
Engine rotations/min 3600 rpm (no-load)
Blade rotations/min 40-100 rpm (no-load)*
Working width 35-62-68-90 cm
Working depth 38 cm
Gear 3 (R-H-L)
Cultivating speeds 8 forward and 4 reverse
Weight 90 / 92.5 kg
Vibration level
Left / right handle
Uncertainty
5,96 / 3,39 m/s
2
(10TG)
3.36 / 4,01 m/s
2
(10B)
1,5 m/s
2
Sound pressure level L
pA
Measure uncertainty
86,1 / 81,3 dB(A)
3 dB
Sound power level L
WA
Measure uncertainty
99 / 99 dB(A)
3 dB
* Measured at the center of blade shaft.
Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries.
Products sold for commercial use, only have a warranty
period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
• Blades
• Cables
• Belts
• Switches
• Membranes/gaskets
• Spark plugs
• Engine liquids (oil, gasoline)
• Starter cords
• Filters
If you start the engine without adding oil, it will be
damaged and cannot be repaired and therefore not
covered by the warranty.
The warranty does NOT cover damages/faults
caused by:
• Lack of service and maintenance
• Structural changes
• Exposure to unusual external conditions
• Damages to the bodywork, deck, handles, panels
etc.
• If the machine has been improperly used or
overloaded
• Wrong use of oil, gasoline or other liquid types,
which are not recommended in this user manual
• Bad or dirty gasoline, which results in
contamination of the fuel system
• Use of unoriginal spare parts.
• Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center.
Your receipt is your warranty note, why it should
always be kept safe.
REMEMBER: The purchase of spare parts as well as
any request for warranty repair, model number, year
and serial number should always been informed. It can
be found on the CE-label on the machine!
* We reserve the right to change the conditions and
accept no liability for any misprints
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas Fusion 10TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas Fusion 10TG in the language / languages: English, German, Danish as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info