Manual Texas El-Tex 2000 (page 12 of 41) (English, German, Danish, French, Polish)

636706

Zoom out

Zoom in

1/41

5. Starting machine

1. Connect to mains electricity and ensure cable is correctly secured in cable holder.

2. Start machine by pressing safety button A, then pull lever B up towards handlebar.

When machine starts, release button A.

3. Activate the clutch lever to start the blades.

Stop machine by releasing both levers.

Tips

Do not start motor before machine is at area to be worked. Always hold machine securely

in both hands. Check extension cable is behind you to avoid cutting it.

The blades will propel the machine forwards. Allow the blades to slowly sink into the soil.

Remember to adjust the wheel yoke before use. When cutting deeply, the most effective

method is to allow the blades to propel the machine forwards for an arm’s length. Pull the

machine back towards you. Allow it to run forwards again. Blades must always operate at

maximum speed. Avoid overloading If the blades get buried, rock machine from side to

side while holding it back, until it comes free.

6. Blade

If the blades are worn or broken, they can

be replaced. Failure to maintain the

blades can cause poor results when culti-

vating, or overload the motor. Always

wear gloves when working near the

blades.

Blades can only be replaced as a set.

When changing blades, remove the first

split pin and the outer blade, followed by

the inner split pin to remove the inner

blade (fig. 6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas El-Tex 2000 in the language / languages: English, German, Danish, French, Polish as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas El-Tex 2000 Manual

Product: