636749
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
Assembling the earth auger
Please assemble the earth auger as followed (see illustration page 3):
1. Set the extension tube (B) on the output shaft on the machine unit (A) lock with bolt and
split.
2. Insert the Auger bit (C) into the extension tube (B) lock with bolt and split.
Operation
1. Before starting the machine, position the auger upright at the desired
drilling point.
2. Position your feet away from the auger bit, ensure a stable and not
slippery foothold.
3. Hold the 2 handles with both hands firmly and press the back plate
close to your thighs
4. Press the safe lock button and slowly squeeze trigger lever.
5. The auger bit will start drilling. To make your drilling more efficient and
stabil. Add a consistent pressure on the handles.
6. Pull periodically, the auger bit out of the drilling hole remove earth and
debris and reinsert auger bit.
Important! Keep the back plate of the machine close to your body at all times. The machine
will strike backwards, when the auger gets jammed during drilling.
Do not put your body weight on the machine, while drilling.
Only use approved auger bits provided by the manufacturer.
Do not operate the machine in excessively hard terrain.
Extension cord
The Extension cord my get disconnected from the power supply during use. This can be
avoided by making a knot with the two cords
Use only extension cords approved for outdoor use
Keep cord away from auger and drilling place.
Before usage; ensure that the cord is safe and not worn. Replace if necessary
Storage and maintenance
Before carrying out any maintenance, cut off the electric power supply by disconnecting the plug
from the extension cable.
Regular cleaning and maintenance of your appliance will ensure efficiency and prolong the
life of your appliance.
Only use a cloth soaked with hot water and a soft brush to clean the application. Never wet
or spray water on the machine!
Do not use detergents or solvents as these could cause irreparable damage to your
appliance. Chemicals can ruin the plastic parts.
To protect the application from corrosion when storing for a longer period, treat the metal
parts with harmless oil to the environment.
Store the appliance in a dry room out reach of kids.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas EA 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas EA 1200 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info