520808
4
Zoom out
Zoom in
Previous page
1/4
Next page
BDA_MD40015_FatScale_AUS.FH10 Mon Dec 01 11:11:56 2003 Seite 4
OPERATION
INSERTING BATTERIES
Four batteries 1.5 V, R03, size AAA, are included.
To insert the batteries, open the door of the battery compartment at the bottom of the unit.
Insert the batteries, observing the polarity (+/ ).
When LO appears in the display, the batteries must be replaced.
Battery disposal
Batteries are special waste and must be properly disposed of. Replace batteries only
with the same or an equivalent type. Do not recharge or dispose of batteries in fire.
Keep batteries away from children.
SELECTING SCALE UNITS
You can select different scale units with the switch on the back of the unit:
- lb: diplays the scale unit in pound and inches ;
- kg: displays the scale unit in kilogramm (kg) and centimetres (cm);
- st-lb: displays the scale unit in stone - pound und inches;
The unit is factory set to kg/cm.
MEASURING WEIGHT
If necessary, select the desired scale unit (see above).
Press the ON button to turn the scale on. The LCD display briefly shows HELO/8888;
then HELO/0.0.
When "HELO/0.0" is shown on the display, please step on the scale within appr.
10 seconds; your weight will appear in the display .
If the scale is not used for appr. 10 seconds after displaying 0.0, it turns off automatically.
4
5
MEASURING BODY FAT AND BODY WATER COMPOSITION
For measuring body fat and water, you have to step on the scale barefoot.
Your feet should be dry. Stand on the outer platforms, under which the electrodes
are placed. Do not bend your knees, and keep your legs apart and straight when
standing on the scale.
Setting the memory
Press the ON button to activate the scale. The LCD display briefly shows HELO/8888; then
HELO/0.0.
Press the SET button. The display shows a flashing 1.
If you wish to use this memory slot, press the SET button again in order to enter your
personal data (see below).
To select a different memory slot (2  12), press the UP button until the number of
the slot you would like to use is displayed, then press the SET button to enter your
personal data.
Entering the personal data
After the memory slot has been selected, a symbol for Female or Male is displayed.
Select your gender with UP or DOWN.
Press SET to confirm.
Now, HEIGHT flashes in the display .
Press UP or DOWN repeatedly in order to enter your height.
Press SET to confirm.
Now, AGE appears in the display.
Press UP or DOWN repeatedly in order to enter your age.
Press SET to confirm.
Wait until 0.0 appears in the display. Stand on the scale as described above.
In the lower field of the display, your body weight is shown first.
Remain standing on the scale for a few seconds. While the body fat and water composition
are being measured, the display oooo will gradually fade out. After a few more seconds,
the display shows alternately
FAT: the body fat percentage (ratio)
: the water percentage (ratio).
In order to access your memory slot, press and hold the ON button. The display will cycle
through the memory slots. When it reaches the memory slot that holds your personal data,
immediately release the ON button. The entered personal data will briefly be displayed.
When the display shows 0.0, step on the scale to measure your weight and body fat
percentage.
[LB]
[kg]
[ST]
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tevion MD 40015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tevion MD 40015 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info