703873
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
Setup and connection
Setup notes
Select a stable, level base.
Make sure that the environment is clean and free from dust.
Avoid placing the unit close to sources of heat or in direct
sunlight.
Arrange the connector cables so that they do not pose a trip
hazard.
Do not place any heavy objects on the cables or the speak-
ers.
The location of the subwoofer can be freely selected and
does not in uence the other speakers. However, do not place
it in the corner of a room as this may cause uncontrollable
frequency overloads. A location between the front speakers
is often ideal.
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
Subwoofer
1. Pull the power plugs of all devices to be connected out of the
socket so that inadvertent switch-on is excluded.
1
Pre Out
Front
Left
Right
CenterRear Front CenterRear
Front SubRear Front SubRear Coaxial 2 Optical 1
5.1 In
Aux CD TV Coaxial 1
Stereo In Digital In
DecoderStation
Subwoofer
US 5305/6
Analogue
5.1 source
e.g. sound card
Analogue
sources
Digital
sources
2. Connect the LINE IN jacks 1 of the subwoofer with the 5.1
output jacks of a preampli er such as a decoder station using
the included RCA cable.
Satellite speakers
Make sure the polarity is correct!
Connect the like coloured terminals. Otherwise the
sound quality will suffer.
The strands of the speaker cables are marked with different
colours or shapes.
6
• The terminal 6 for connecting the satellite speakers is lo-
cated on the back side of the subwoofer.
Here you can connect the speaker cables directly or with
pin plugs. We only describe the direct connection in these
instructions.
1. Lay the included speaker cables from your subwoofer to
each of the speakers.
Little hint: Label the cables on the subwoofer side – this will
help when taking down and setting up your audio equipment.
2. Split the single wire down to approx. 30 mm on both ends
and strip approx. 10 mm of insulation off of each cord.
3. Twist the stripped single wire ends together so that no wire
protrudes. Tin coating is not necessary.
4. Turn the connector terminal counterclockwise until loose.
Run the stripped cable end into the now visible hole. Close
the terminal by turning it counterclockwise. The cable has
now been clamped in place.
5. Connect the other cable ends to your satellite speakers. The
operating instructions of the speakers should contain notes
on this.
Connection to the grid
7
8
1. Ensure that the mains switch 7 “Power” on the subwoofer is
switched off (“OFF” position).
2. Connect the mains connector jack 8 with a mains socket us-
ing the power cord .
3. Also plug the mains plug of your AV receiver back into the
socket.
4. Turn the mains switch 7 “Power” on the subwoofer to “ON”.
92094 GB 20120301.indd 592094 GB 20120301.indd 5 01.03.12 16:1801.03.12 16:18
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel US 5305 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel US 5305 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info