562426
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
Frequently Asked Questions
by temporarily disconnecting it from
power supply.
3. Then start the setup from the begin-
ning. When being prompted „Do
you own a Raumfeld Base?, care-
fully check if your order contains a
Raumfeld Base (also see page 13)
and choose the appropriate path in
the setup wizard.
Question 2: The Controller does not
react any longer. How can I restart it?
ĕ When the Controller no longer reacts
to finger touch or turning the volume
control:
1. First switch off the device by
pushing and holding the On/Off
button for at least 10 seconds.
2. Now, briefly press the On/Off
button. After approximately two
seconds the Raumfeld Logo is
displayed and the Controller is
started.
Should the Controller still not react, the
battery may need to be recharged
Resetting
Question 1: Can I reset the system and
start installation from the beginning?
ĕ If the Controller or the App are
connected to your Raumfeld system,
you can restart the setup wizard by
resetting the „Controller configuration
under „Settings > System maintenance
> Reset“.
If the Controller or the App are not
connected to the system, a help option
will appear after a short time, offering a
possibility to reset.
Setting up music resources
Question 1: The Raumfeld Base does
not appear under “Network” in the
Windows Explorer. What can I do?
ĕ Enter \\Raumfeld-Base into the
address line of your Windows Explorer
(not Internet Explorer!).
Should that not work enter the IP
address of the Raumfeld Base into the
address bar, e.g. \\192.168.0.15.
Question 2: The Raumfeld Base does
not appear under “File sharing” in the
Mac OS Finder. What can I do?
ĕ Open the menu item “Go > Connect
to server...” in the Finder. Then enter
smb://base.local into the field “Server
address” and confirm the dialog box
that appears afterwards.
Question 3: My USB memory device
is not recognised as a music resource.
What could be the reason for this?
ĕ USB memory devices are only
included as a music resource if they
are connected to the host of the Raum-
feld system. In a system with a Raum-
feld Base (see page 13), this is the Base.
In a system without Raumfeld Base, you
can specify the device you would like to
act as host under “Settings > Network >
Host configuration. Please also note that
USB hard drives which are connected
to a Raumfeld playback device need
to have their own power supply. This
restriction does not apply to the Raum-
feld Base.
Question 4: Music from my media server
is displayed unreliably and playback
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Raumfeld Speaker L 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Raumfeld Speaker L 2 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info