562414
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Frequently Asked Questions
Installation using the
Raumfeld App
Question 1: The App does not connect to
the Raumfeld system during setup. What
can I do?
1. First check if all system requirements
are in place.
2. Make sure that the smart phone
or tablet with the App installed is
connected to your Wi-Fi router.
3. After that, remove all Raumfeld
devices from power supply. Delete
the App and reinstall it. Restart your
Wi-Fi router as well by temporarily
disconnecting it from power supply.
4. Then start the setup from the begin-
ning. When being prompted „Do you
own a Raumfeld Base?, carefully
check if your order contains a Raum-
feld Base (also see page 10) and
choose the appropriate path in the
setup wizard.
5. If the App still fails to connect with
the Raumfeld system, it could be
because of compatibility problems
with your router. You can avoid this
problem if, during installation, you
interpose a standard network switch
(about EUR 10, available at electronic
shops) between your router and the
Raumfeld device you would like to
install first. In this case, please also
inform our customer service.
Question 2: When can I remove the
network cable after setting up the Cube
with the Raumfeld App?
You can remove the network cable as
soon as the setup wizard of the App
has finished, and the home screen is
displayed.
Question 3: The App does not react any
longer. What can I do?
Devices with Android OS: Go to the
device settings and select the Raum-
feld App under „Apps. Choose
Clear data“ and restart the Raum-
feld app subsequently from the
devices app menu.
Devices with iOS: Close the Raum-
feld App. Then, double-push the
Home button of the iOS device. A
bar containing four app symbols
will appear on the bottom of the
screen. Press and hold the Raumfeld
symbol on this bar until a minus sign
appears. Briefly tap the symbol to
clear it from the bar, then restart the
app from the devices main menu.
Installation with the
Raumfeld Controller
Question 1: The Controller does not
connect to the Raumfeld system during
setup. What can I do?
1. First check if all system requirements
are in place.
2. Then remove all Raumfeld devices
from power supply. Switch off the
Controller by holding the on/off key
pressed down (at least 10 seconds).
Restart your Wi-Fi router by tempora-
rily disconnecting it from power
supply.
3. Then start the setup from the begin-
ning. When being prompted „Do you
own a Raumfeld Base?, carefully
check if your order contains a Raum-
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Raumfeld Cube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Raumfeld Cube in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info